100SILEX, de 0 100 s: While
1522 5 Simple steps to secure TT-RSS reader
secure tt-rss, tt-rss security 5 Simple steps to secure TT-RSS reader July 27, 2015 by Anand Leave a Comment secure-tt-rss-ft Share: share htpcBeginner We recently presented Tiny Tiny RSS to you as a great alternative to Google reader, which is one more way you can extend the functionality of your home server or your hosting space. Hopefully, you already exported your data from Google Reader. In this post, we will show you how to secure TT-RSS reader to prevent unauthorized access. Tiny Tiny RSS is an open source web-based news feed (RSS/Atom) reader and aggregator, designed to allow you to read news from any location, while feeling as close to a real desktop application as possible. As we previously explained, it makes an ideal candidate to replace Google Reader. While there are services like Feedly and Newsblur grabbing the crowd Google Reader, which some of you may prefer, there are a group of people who would like to run a RSS reader on their own server and keep things private. Assuming that you have already installed Tiny Tiny RSS on your alternative to Google reader or hosting space, we will now show you how to secure TT-RSS reader. Secure TT-RSS Reader One of the main reasons to move to an RSS aggregator like TT-RSS is maintaining your privacy. So if you do not secure TT-RSS reader well you are not only making your data available public but also making your system vulnerable to potential attacks. Choosing a strong username and password while setting your TT-RSS is the first basic thing that you can do to secure TT-RSS reader. Listed below are few more ways you can increase TT-RSS reader’s security. 1. Rename TT-RSS Folder One of the first lines of defense is to not use tt-rss in your URL to access your TT-RSS reader. To do this on your hosting account, use a folder name other than tt-rss while installing TT-RSS. On your Linux home server, edit /etc/tt-rss/apache.conf and change the first /tt-rss to something else. An example is shown below. TT-RSS Rename URL TT-RSS Rename URL After making the change, restart your TT-RSS and Apache to apply the changes: sudo service tt-rss restart sudo serivce apache2 reload Your TT-RSS reader is now available through the new URL (example: http://mydomain.com/myreader) only. Amazon Kindle Fire HDX 2. Enable SSL Accessing TT-RSS through http sends all information as unencrypted data. This could mean less privacy due to potential sniffing. The solution is to encrypt the data during transfer, which makes sniffing by hackers harder. To enable and enforce HTTPS access on Linux servers with Apache, install the following run-time libraries: sudo apt-get install libssl0.9.8 libpam0g openssl Restart your Apache server as shown above. You should now be able to access your TT-RSS reader with HTTPS. Note that you may have to have a SSL certificate generated. Refer to Apache documentation if you want to generate your own certificate. By default, the system will install self-signed certificates for you. These certificates are likely to raise warnings when you point your browser to the site. 3. Disable Single User Mode By default the single user mode is already disabled (in /etc/tt-rss/config.php). Enabling single user mode will also disable TT-RSS login system. Therefore, keep the single user mode disabled. Disable Single User Mode Disable Single User Mode A better way to make it a single user system is by limiting the number of registrations to 1 as described below. For whatever reason, you still want to enable single user mode, make sure you implement Apache Authentication method described below. 4. Self Registrations Self registrations allow a visitor to register themselves, which could reduce TT-RSS security. If your TT-RSS will be for personal use only, then you may want to disable user registration by setting “ENABLE_REGISTRATION” to “false”. TT-RSS Self Registrations TT-RSS Self Registrations To further secure TT-RSS Reader, uou may also want to change “REG_MAX_USERS” to “1” to make your account the only account on TT-RSS. asus n66uASUS RT-N66U Dual-Band Wireless-N900 Gigabit Router asus n66u reviewsFind out why it is rated the best wireless router in its class. 5. Apache Authentication Last but not the least, enable Authentication. This is even more important if you have enabled “Single User Mode” describe above. Every time you access TT-RSS, you will be asked for a username and password as shown in the picture below: Secure TT-RSS Reader On your hosting account this equivalent to password protecting a directory, in this case the TT-RSS directory. To do this on your Ubuntu server, you will have to create a .htpasswd file. More information is available in Apache documentation. But the easiest way to achieve this is to use one of the htpasswd generators available online. After you enter the username and password two code blocks will be generated. Copy the contents of the .htpasswd code block and save it to /etc/apache2/.htpasswd_ttrss. Next, copy the contents of the .htaccess code block and add it to /etc/tt-rss/apache.conf as shown below: TT-RSS Apache Authentication TT-RSS Apache Authentication Save and exit. Restart both TT-RSS and Apache previous shown above. You should be prompted for a password every time you try to access TT-RSS. Some may think that this double authentication method is an extra inconvenience. But I would rather be safe than sorry. Go ahead, secure Tiny Tiny RSS Reader and enjoy reading articles on your private secure RSS Reader.
http://www.htpcbeginner.com/secure-tt-rss-reader/

1408 » Cut simple SMT Stencil from common aluminum flashing on your CNC Animodule.com
Cut simple SMT Stencil from common aluminum flashing on your CNC Here’s a quick photodoc of how I made a reusable SMT stencil from some aluminum siding I had laying around. It’s very simple to assemble and works great. Dirt cheap too. I had picked up a roll of aluminum flashing a few years ago to flash some chimneys I rebuilt/repointed and was curious to see how it would hold up as an SMT stencil. To buy an SMT stencil frame is near $1000 so I didn’t have much to lose if it didn’t work out. I cut the frame out of some birch plywood since I had some handy. Really any sturdy frame would do the trick. You could easily glue one together out of some 1x or trim board. I put a thicker sheet of aluminum down underneath the flashing to give the CNC endmill something sturdy to cut against and clamped it down stretched and tight. My thought there was that If I cut straight on the MDF it might push on the flashing and bend it before it cut through. A 1mm endmill did the trick. Each pass was .05mm deep. I pulled the Flashing tight and stapled it to the frame. No rocket science here. I taped up the inside edges so no solderpaste could squeeze between the frame and the stencil. I had some old screen print hinge boards so I just attached this frame the same way I would a screen print stencil. The only fiddly part was aligning the first PCB. You have to push around a little and lift the stencil and fiddle with it a little bit. Once I get all the pads lined up correctly I hold it in place and trace around it with a thin tip sharpie marker. Then you place the PCB in the outline. If you have the height adjusted correctly the stencil is sturdy enough to hold the PCB in place while you print the Solderpaste on it. just hold the stencil frame down and it pushes down on the PCB. I used a flexible putty knife as a squeegee. It worked fine. Cleanup was a breeze. Just scrape it off, unscrew the stencil frame from the hingeboard and stick it in the corner till you are ready to do another run.
http://www.animodule.com/diy-2/cut-simple-smt-stencil-from-common-aluminum-flashing-on-your-cnc/

1386 Retro Synth Ads: Sound Master Memory Rhythm SR-88, Keyboard 1982
Sound Master Memory Rhythm SR-88 drum machine 1-page advertisement from page 67 in Keyboard Magazine August 1982. Hmmm. Not sure how I feel about this ad. There just seems to be a lot going on. For example, am I supposed to know who "The Rhythm Section" is? The fact that they include themselves in an already long ad title suggests they must be some kind of a big deal. And then you find their name again in the bottom left-hand corner: "The SR-88. Another innovative product from The Rhythm Section by Sound Master Distributed exclusively by JTG of Nashville." So, let me get this straight. JTG of Nashville is the distributor of the SR-88 which was created by The Rhythm Section which is somehow owned or operated by Sound Master. That is waaaaay to much information. Sounds like something political is going on there, and readers unfortunately get stuck in the middle of it. There also seems to be a lot of ad-copy which actually doesn t give me much information. Reason #4 gives readers the most info including instant stop/start, variable tone and output switches, and a write/play mode indicator. The most I glean out of the four other reasons put together is: 16 rhythms, clock pulse and a price of under $200. The actual specs that are probably most important to potential buyers are inexplicably shoved into the bottom right-hand corner. Luckily for me, there are a few resources on the Web with more information about this beast. Unluckily for blog readers, as soon as I started looking for more info, I got swept up in a certain SR-88/Boss DR-55 controversy. Comparing the SR-88 and Boss DR-55 One of the first Web sites I hit while looking for info on the SR-88 was Dubsounds.com. The site includes a great little write-up on the SR-88, but, more interesting was finding out about a little controversy about whether the SR-88 or the very similar Boss DR-55 came out first. The two do seem mighty similar in functionality. For comparison purposes, I did a quick search on MATRIXSYNTH to find more photos. . A great photo of a gray SR-88 can be found in this December 2005 SR-88 MATRIXSYNTH auction post and the less common, but definitely more cool, blue SR-88 can be seen in this January 2011 MATRIXSYNTH auction post. Comparing the two to the Amdek RMK-100 Interestingly, it s not just these two machines that look and function similarly. In this May 2009 MATRIXSYNTH SR-88 auction post commenter "PAC" notices: "Interesting. I have an Amdek RMK-100 (sold as kit), very similar!" Never heard of it, so I Googled "Amdek RMK-100" to see just how similar it was to both the DR-55 and the SR-88. Turns out (according to the Internet) that Amdek products were made by Boss/Roland back in 80s, and, not only that, but that the RMK-100 is actually the kit version of the Boss DR-55. Makes sense on why it would also be similar to the SR-88. I found an ebay auction for an Amdek RMK-100 going on right now with a great photo of the front panel (see below), and indeed it does share a lot with the DR-55 and SR-88 - but definitely not identical to either one. For example, it looks like the Amdek and SR-88 share a similar filler function that as far as I can tell is not available on the DR-55. And the DR-55 and the RMK-100 share a similar accent function that I don t see on the SR-88. Now where does the Electro Dynamics Corporation Programmable Rhythm SR-99 fit in? I also came across another machine with similar features - the Programmable Rhythm SR-99. No - not manufactured by Sound Master, but by Electro Dynamics Corporation. And, it too resembles the others in functionality, and especially the SR-88 in design also. I ve included a row of photos below to help make the comparison between the two. The SR-88 photo is from the 2005 MATRIXSYNTH auction post and the EDC SR-99 photo is from the excellent BigBlueWave.co.uk site. I ve also thrown in a photo from another recent E-bay listing that included both - plus boxes and manuals! Sick! Obviously, Sound Master and EDC are somehow connected, although I can t find any info on the Internet concerning these two companies. I do know that they were both advertising separately in Keyboard Magazine in late 1983, making it unlikely that one of the companies changed their name to the other. Anyone know anything? And then there is the Clef Master Rhythm... Now, I m going to throw in a late entry. It s Sunday night, and I just came across this August 2010 MATRIXSYNTH auction post for the Clef Master Rhythm. It not only shares part of the name of one of the other units ("Master"), it too has many features of the other rhythm machines, and identical innards as the DR-55, but is expanded to include even more sounds: "This is essentially a fully expanded Boss DR-55 feature-wise and tone-wise. The circuits are identical (schematically and tonally) to the Boss DR-55, but the Clef Master Rhythm gives you way more instruments than the Boss DR-55..." Interestingly, according to the post, it pre-dates the Boss DR-55 - and also came in a kit form like the Amdek. "The Clef Master Rhythm came out a little before the Boss DR-55 in late 1979/early 1980. It was sold in two versions and available in greater quantities in Europe than in the United States. One version was a kit that the user put together and another one was a prebuilt machine." A photo from the MATRIXSYNTH post really helps show the similarities in functions with the others: What does it all mean? So, looking at all five machines, its almost like there was a rhythm machine salad bar of some sort in Japan, and each company stepped up to it and picked out which features they wanted to include in their product. And that begs the question - since we know there was a kit form available and there are claims that the Clef Master even has the same circuits as the DR-55, could all five products (and probably others) have used the exact same internal parts - each company choosing which features to include and then customizing in their respective rhythm machine? And if so, were those parts supplied by Amdek, or did all five get their internal parts from some other manufacturer? And if that is the case, then the question of whether the SR-88 or DR-55 came first doesn t really matter much, since it is likely that the kit components would have been available first. Plus, we have that one auction post with the claim that the Clef Master came out before the DR-55 - making it all even more confusing to figure out. Or, am I totally off the mark on all this? Were they all created separately? Maybe I ve just been fixated on this a little too much... I ll keep on looking for more info on these companies and any connection they might have, but if anyone want to buy all four and open them up to take a look - it would be muchly appreciated. :D Posted by RetroSynthAds at 12:05 PM Labels: 1982, amdek, clef master, dr-55, drum machine, electro dynamics corporation, keyboard magazine, rmk-100, Sound Master, sr-88, sr-99 2 comments: Simon said... Here s a funny thing - I seem to remember Clef in the early 1980s as a British company that made electronic pianos (touch-sensitive ones!) in kit form. Deep in the back of my mind I recall seeing them at a music fair in London with a couple of their pianos and some drum machines including a prototype drum/bass/chord sequencer called something like a "Band-Box". But it WAS a long time ago. February 12, 2012 at 12:36 PM Simon said... Looks like (for once) my memory didn t fail me. Here is a 1982 ad for Clef Electronics showing all the products I mentioned, plus a natty-looking little monosynth! BTW, I owned an EDC SR99 drum machine in the mid-1980s, but replaced it with a Yamaha RX-21 a couple of years later. February 12, 2012 at 12:46 PM
http://retrosynthads.blogspot.fr/2011/08/sound-master-memory-rhythm-sr-88.html

1164 Liz Lang at The MAP
A cathartic experience. As a composer, musical sound designer, and performer my lifelong passion/goal is to give listeners exactly that. Through works that evoke a sense of mood, mystery, and otherworldliness. To achieve this, in a given composition I make a landscape of voice and/or instrumentation layered with heavily morphed samples and altered field recordings. The juxtaposition of familiar with supra-familiar gives the listener the experience of melody/harmony as a guiding light while giving voice to sonic geography of forms and energies unable to exist naturally in our matter-based world. Bel canto voice training, impressionist and futurist composers, glitch and industrial/ambient genres all figure into what comprises my influences. My professional experience includes composing, musical sound design, scoring, recording foley and dialogue, and creating sound effects for independent film. My work also appears on a number of collaborations on CD and vinyl currently floating around the globe, with works-in-progress slated for near-future release.
http://www.themap.org/lizlang/index.php?area=audio

1132 Mammoth Modular Synthesizer At MIT Museum
Just got an update from Joe Paradiso on his homebuilt mammoth analog modular synthesizer. He’s installed it in the MIT Museum and has completed a fairly epic patch which you can listen to (24 hours a day!) here. Joe will be at the museum this Thursday and Friday (2/23 and 2/24) at 1pm, demoing the synth to visitors, so be sure to stop by if you’re in the neighborhood. Here’s some info from Joe on the construction and inspiration for the latest patch. The second patch I made at the MIT Museum is totally done now, and you can hear it live on the stream. Listen to it at http://synth.media.mit.edu, and let me know what you think if you’re inclined – it’s running in physical space in Quad, of course – stereo on the stream. Note that this one has absolutely NO sequencer of any sort on it – all of the patterns you hear were made entirely from hand-patched logic (counters, ands, ors, flip flops, ring counters, rate multipliers, etc.). It’s an entirely different kind of composition environment from the norm – you really need to simultaneously be an engineer while being an artist and something of a performer. The inspiration for this patch started with the Boredoms – if you don’t know who they are, you should (http://www.boredoms.jp/). In particular, I was thinking of SuperRoots 9. The beauty of the patching interface is that you can never exactly nail what you start out to attain, but on the other hand, you get drawn into places you wouldn’t have normally gone once you start. The 3 drummers that Yamantaka Eye performs with lay down a compelling rhythm that my hand-patched logic and analog processing can’t match, of course. But this patch definitely has a strange jumpy groove once it gets into gear, and the 2-chord pad is archetypical too. Yes, Boredoms rule today! BTW, this patch took every cord I had, plus a good 30 more wires just shoved into the pin jacks – check out the photos here and here – the latter shows the kind of logic section patching complexity you need to build a sonic environment like this one. I’m ripping this baby out next Thursday, as I’ll be at the museum next Thursday and Friday (2/23 and 2/24) at 1pm to demonstrate the synthesizer to visitors – doing some very simple patches and showing off what the modules do in case anybody is interested in this. It will run continuously until then. Otherwise, enjoy the stream – there are moments of introspective drift in-between wild percussion (yes, Boredoms!). I might pull the percussion line back so it doesn’t come so often or regularly, but it’s essentially a wrap.
http://synth.media.mit.edu/

1109 Weekend with the Ricoh GRDIV |
I’ve fielded a lot of questions lately about Ricoh’s latest camera, the GRDIV. Honestly, it was getting a little tedious hearing about it haha. Although I suppose I understand considering there’s hardly anything written about it anywhere. I’ve been having a bit of a love affair with Ricoh’s film cameras the last little while so I hadn’t thought much about the GRDIV. After having a chance to get one though, I decided it a good idea to give it a go.
http://jtinseoul.wordpress.com/2011/11/06/weekend-with-the-ricoh-grdiv/

1052 Lab Overview
Not that I recommend this level of excitement to everyone, but this is my lab. It is my basement, and as you may note from the disheveled ceiling tiles up above, having this much equipment has actually forced me to purchase a separate AC unit for the basement. So my trendy two-zone AC house has now magically become a three-zone AC house. Fortunately, I didn't need a furnace for down here. Equipment is great in the winter to heat your house! The lab has taken on a life of it's own over time... It started out as a single standard 7-foot 19" rack. Then it grew to two standard racks... Then it changed into three Ortronics Mighty-Mo 19" rack systems (because those are cool). As seen now, it has changed yet again into four separate rack cabinets. The cabinets are a bit pricey, so they aren't all the same vendor. Note to all, even if you find a really good price on Ebay, be aware that you still have to ship them, and they weigh a LOT! (This means, have lots of friends and lots of pizza/beer!) Nov'04 -- Well, things have moved even more! The equipment was beating the AC unit that ran for the basement. So instead of being a three-level, three-zone house, we had to upgrade to being a four-zone house. Go figure. As noted above, I would not recommend this path to anyone unless you have a good amount of business to drive it! All of the equipment here is used for testing and lab purposes, but easily serves as Proof of Concept lab for many consulting clients of mine. The recent change was that the crawlspace area under the kitchen area was excavated out and had a concrete floor poured making an enclosed little room. In addition, a large air handler (AKA Mongo AC Unit) was put into that specific room and a door was installed for access and physical separation! While all a very interesting project, it is a pain to move any equipment that you amass, so definitely plan ahead for this sort of activity!
http://smorris.uber-geek.net/lab.htm

987 Alesis Micron
This is one of the cutest, smallest, yet most powerful synths I've ever put my hands on! The Micron is the sequel to the popular Ion, and while it can be considered as the Ion's younger brother, it actually has a few enhancements that are absent on the big bro. This is a very clean, precise, sparkly and definitely virtual analog (or analog modeled) sounding synth. Eight voices of polyphony are plenty for these types of units, but we would always want more. The synth engine is the same as the Ion though, but extra and welcome features include sequencing, arpeggio, and great on board percussion, and the ability to build patterns. The Micron really sounds bigger than it looks: while personally I feel that the character of its synth engine leans on the more digitally precise DSP side of virtual analog technology, it's certainly capable of huge, warm and fat sounds. The main panel is logically laid out and easy to understand. At the very left, a big red knob offers volume control; the two "m1" and "m2" sliders provide useful modulation control, typically (but not always) vibrato and filter cutoff. The three knobs labeled "x", "y" and "z" also offer way of modulating sounds, and can (ought to) be assigned to your favorite parameters. Two octave buttons, and other useful commands such as tap (tempo) and latch (sustains the notes) occupy the space at the left of the two-line backlit green display. Finally, a multi-function matrix with push-down knob serve as the central nerve system of the machine, letting you easily access programs, setups, configurations, patterns and rhythms. You do the programming by turning the knob to view the various editing pages. In all, it's simple to program, and the manual does a fantastic job of being easy to follow and easy to understand.
http://www.synthmania.com/micron.htm

909 5 Things You Should Never Say While Negotiating
5 Things You Should Never Say While Negotiating: If you're new to small business negotiating or find deal-making to be difficult, here are some missteps to avoid. small business negotiations, negotiating, deal making, negotiation tips, sales tips
http://www.inc.com/guides/2011/01/five-things-to-never-say-while-negotiating.html

865 Evolver.html
Just Beautiful! What an amazing instrument! The DSI Evolver has the signature "old school" timbre down pat as well as being able to provide digital timbres reminiscent of the Waldorf Q. There's certainly a "rougher" side available as well with all the feedback implementation and controled distortion. Being able to make PM type plucked and blown sounds is just icing on the cake. Dave Smith should be commended for a job well done. Just have a look at the Panel Layout to get a taste of what this beauty can dish out - the controls are pretty much laid out in the form of a signal path graphic. Be sure to visit Dave Smith's Website! Evolver Sound Examples There are a lot of demos of the Evolver on the web showcasing the gutsy harsh sounds of this beast so I decided to post demos of some of my own patches as examples of the "softer" more "vintage" side of the Evolver's timbre. I make no apologies for these unpolished recordings - these are merely sound samples ;) Resonant Plucked Pad This pad shows some of the rich resonant nature of the filter. Soft Lead This is a simple analog brass lead patch. FM Pad A fun patch with lots of motion made using my "Audio-rate Filter FM" programming tip below. Warm Pad A nice bland-vanilla pad ^_^ What can I say? I love pads... For more MP3 demos showing the full gamut of sounds the Evolver and Polyevolver are capable of, please visit the excellent website of Stefan Trippler! The Definitive Guide to Evolver This rather in-depth guide to the Evolver goes places and does things a mere manual can't. This labor-of-love was crafted by Anu Kirk and with his kind permission, I am offering this fantastic resource right here in PDF format! A much smaller version (400K) is here but it dosen't have internal hyperlinks. Programming Tips Here's a fun repository of programming tips for the Evolver in all its incarnations. Please email me if you would like to add some. Fingered Wave Sequence Submitted by Dave Bryce. This brilliant technique has to be heard to be believed! Plus, its one of those cool things unique to the Evolver! This particular tip is so full of detailed information that it gets its own page! Audio-rate Filter FM Submitted by James Maier. Use the "Audio Mod" parameter in the Filter section to frequency-modulate the cutoff with the analog oscillator. Add resonance until the filter is just on the edge of oscillation then mod the cutoff with just a little triangle LFO set at a very slow speed. Amazing moving chorusing pad and lead sounds can be made this way. Fatter Bass/Pad Sounds Submitted by Mike Peake. Set the same sound in both channels (detuned saws, for instance). With the filters at the 24dB setting, increasing resonance cuts the passband as on the Moog filters. Set Envelope 3 to minimum attack, maximum decay and release, and sustain to maximum. This "creates" an offset, a continuous "on" signal while the keys are gated. Modulate one filters' resonance up (just one), or of the overall resonance level is high, us it to modulate one filters' resonance to its minimum. You get the resonant character plus the size of the non-resonant filter. Use Tri and Sine waves on that side too. "Warmer" Sounds Submitted by James Maier. The Evolver can make many ultra-bright and buzzy sounds due to its extensive feedback and distortion stages but sometimes people miss the subtler side of the beast. For a warmer sound use little or no distortion, close the filter just a bit and turn off the feedback and delay lines. I've managed to get dead-on Prophet5 timbres this way. Adding "Punch" Submitted by Mike Peake. Set the envelopes to linear, and use a Mod to modulate AmpEnv All by itself (lin through log responses with positive and negative self-modulation). This is of course fun on the filter envelopes as well. More Vintage Character Submitted by Mike Peake. Oscillator Slop, set at 5, doesn't come close to the Moog and other old-timer movement, so add slight (1 or 2) LFO to pitch modulations, with individual LFOs per oscillator, and a touch of LFO to LFO rate modulation. A tad of Envelope 3 to pitch helps as well. Don't miss out on the 12dB filter setting Submitted by Mike Peake. The 24dB setting has much more resonance, but the 12dB setting can sound nice and plucky, and do nice slightly fuzzy pads etc. DSI Evolver Waveshape Charts Below are charts I've assembled of the digital waveforms and their spectra as currently used in the DSI Evolver synthesizers. Originally these waves were unique to the SCI ProphetVS vector synth. I find these waveform/spectra graphics really usefull when programming sounds - maybe you will as well. Pay special attention to the spectra as this info is sometimes much more useful than waveshape in determining actual timbre - even before you hear what the waveform sounds like. These are designed to be downloaded (right-click & "save target as"), and printed at 300dpi on 8.5" x 11" pages - don't resize these images before printing or you will lose useful detail. Use them as a handy refrence. This information was cobbled together from various scattered sources (with very special thanks to Achim Gratz!). Any errors or omissions are my own. ^_^ HAVE FUN!!! Page 1 Page 2 Page 3 Page 4 As far as the origin of these waves is concerned, one of the original VS engineers, Chris Meyer, said: "The original waves for the VS were created three ways - extracting single-cycles from sampled sounds, using a custom additive synthesis program, and using a program Josh (Josh Jeffe, another VS engineer) slapped together called "Hacker" where you could draw the waveshape. These were fed straight from the computer through the filter and VCA of a Pro-One to figure out what they might sound like in a patch. And by the way, no PPG waveforms appear inside the VS - we had access to them, but in the end our consciences got the better of us. We did steal some waveforms from the Korg DW6000, but only by looking at the harmonic drawings on the front panel and trying to imitate them in our additive synthesis program." Modulation Matrix "Cheat Sheet" This chart shows all the modulation routing available on the Evolver. This same info is available in the manual but this can be printed on a single sheet of paper as a handy refrence! Evolver Wallpaper These I created just for fun and desktop "beautification" ;) 1280 X 1024 1024 X 768 800 X 600
http://www.carbon111.com/evolver.html

788 Setting Up Your Digital Camera For HDR Shooting
You’ve probably heard of High Dynamic Range (HDR) Photography, it’s made quite an entrance into the world of digital photography. If you haven’t, the HDR process is accomplished by taking multiple exposures of a high contrast scene (usually a landscape or cityscape), at different levels of brightness, and then combining the best light from each exposure into one image. The end result is a stunning image that very closely resembles how the human eye views a scene. This process of digital manipulation has caused a bit of controversy and debate in the world of photography, especially with images that are “over-cooked.” One thing is for sure though, HDR is here to stay. When done right, this unique and in depth processing technique can produce beautiful works of art that mimic the way we view and remember a landscape or scene. The above image is an example of what HDR processing can produce. This image, taken from the Big Island of Hawaii, would not be possible without HDR processing. It was taken around noon, the harshest light of the day. The first image is the best image my camera could produce given the situation. While still beautiful, there are obvious problems. Get ready, this article is going to show you how to take your digital camera and turn it into an HDR shooting machine!
http://www.digital-photography-school.com/setting-up-your-digital-camera-for-hdr-shooting

767 The 5 types of programmers « Steven Benner's Blog
In my code journeys and programming adventures I’ve encountered many strange foes, and even stranger allies. I’ve identified at least five different kinds of code warriors, some make for wonderful comrades in arms, while others seem to foil my every plan. However they all have their place in the pantheon of software development. Without a healthy mix of these different programming styles you’ll probably find your projects either take too long to complete, are not stable enough or are too perfect for humans to look upon. The duct tape programmer The code may not be pretty, but damnit, it works! This guy is the foundation of your company. When something goes wrong he will fix it fast and in a way that won’t break again. Of course he doesn’t care about how it looks, ease of use, or any of those other trivial concerns, but he will make it happen, without a bunch of talk or time-wasting nonsense. The best way to use this person is to point at a problem and walk away. The OCD perfectionist programmer You want to do what to my code? This guy doesn’t care about your deadlines or budgets, those are insignificant when compared to the art form that is programming. When you do finally receive the finished product you will have no option but submit to the stunning glory and radiant beauty of perfectly formatted, no, perfectly beautiful code, that is so efficient that anything you would want to do to it would do nothing but defame a masterpiece. He is the only one qualified to work on his code. The anti-programming programmer I’m a programmer, damnit. I don’t write code. His world has one simple truth; writing code is bad. If you have to write something then you’re doing it wrong. Someone else has already done the work so just use their code. He will tell you how much faster this development practice is, even though he takes as long or longer than the other programmers. But when you get the project it will only be 20 lines of actual code and will be very easy to read. It may not be very fast, efficient, or forward-compatible, but it will be done with the least effort required. The half-assed programmer What do you want? It works doesn’t it? The guy who couldn’t care less about quality, that’s someone elses job. He accomplishes the tasks that he’s asked to do, quickly. You may not like his work, the other programmers hate it, but management and the clients love it. As much pain as he will cause you in the future, he is single-handedly keeping your deadlines so you can’t scoff at it (no matter how much you want to). The theoretical programmer Well, that’s a possibility, but in practice this might be a better alternative. This guy is more interested the options than what should be done. He will spend 80% of his time staring blankly at his computer thinking up ways to accomplish a task, 15% of his time complaining about unreasonable deadlines, 4% of his time refining the options, and 1% of his time writing code. When you receive the final work it will always be accompanied by the phrase “if I had more time I could have done this the right way”. Where do you fit? Personally, I’d have to classify myself as the perfectionist. So, which type of programmer are you? Or perhaps you know another programming archetype that is missing from my list? Post a comment below and I’ll add it to a new updated list.
http://stevenbenner.com/2010/07/the-5-types-of-programmers/

756 Matmos - Supreme Balloon
The arcs of rising and falling pitches that start this song reminded us of a rainbow, and the title stuck: any resemblance to fluttering symbols of homo-nationalist pride are side effects. People have asked us about the Latin kitsch aspect of the song, and we plead guilty to a great love of the Richard Hayman "The Genuine Electric Latin Love Machine" Moog novelty LP from 1969. Having lived in the Mission District of San Francisco for seven years up until our recent move to Baltimore, we have had enough casual exposure to actual Mexican and Salvadorean music to know that this bears only the faintest relation to the real thing. Keith Fullerton Whitman contributed some tasty squelches and zaps from his Doepfer modular synth to brighten the corners, but not everything on here is that high-tech. Consider the lowly stylophone, a handheld novelty instrument popular with British schoolkids that was immortalized during the rave era in the cheesy techno banger "Stylophonia" by the fabulously named UK crew Two Little Boys. The stylophone that is played on this record was sent to us in the mail by a well-wisher and we thank him for this unexpected present. We are even more grateful to Safety Scissors, who forgave us when M. C. Schmidt broke his MS-20 filter knob by tweaking it too vigorously while recording the "horn" part of this song. It's all been patched up now.
http://www.brainwashed.com/common/htdocs/discog/ole799.php?site=matmos

722 Making AJAX Applications Crawlable - Google Code
If you're running an AJAX application with content that you'd like to appear in search results, we have a new process that, when implemented, can help Google (and potentially other search engines) crawl and index your content. Historically, AJAX applications have been difficult for search engines to process because AJAX content is produced dynamically by the browser and thus not visible to crawlers. While there are existing methods for dealing with this problem, they involve regular manual maintenance to keep the content up-to-date. Learn more Learn why search engines don't see the content you see and what needs to happen to fix this. Getting started guide Get started in making your AJAX application visible to search engines. If you are in a hurry, you can start here, but AJAX crawling is a complex topic, so we recommend reading all the documentation. Creating HTML snapshots Learn more about creating HTML snapshots, and which technique might be best suited for your application. Frequently asked questions Having trouble? Check out the frequently asked questions. Specification Get the details.
http://code.google.com/intl/fr/web/ajaxcrawling/

720 Common Security Mistakes in Web Applications - Smashing Magazine
Web application developers today need to be skilled in a multitude of disciplines. It’s necessary to build an application that is user friendly, highly performant, accessible and secure, all while executing partially in an untrusted environment that you, the developer, have no control over. I speak, of course, about the User Agent. Most commonly seen in the form of a web browser, but in reality, one never really knows what’s on the other end of the HTTP connection. There are many things to worry about when it comes to security on the Web. Is your site protected against denial of service attacks? Is your user data safe? Can your users be tricked into doing things they would not normally do? Is it possible for an attacker to pollute your database with fake data? Is it possible for an attacker to gain unauthorized access to restricted parts of your site? Unfortunately, unless we’re careful with the code we write, the answer to these questions can often be one we’d rather not hear. We’ll skip over denial of service attacks in this article, but take a close look at the other issues. To be more conformant with standard terminology, we’ll talk about Cross-Site Scripting (XSS), Cross-Site Request Forgery (CSRF), Phishing, Shell injection and SQL injection. We’ll also assume PHP as the language of development, but the problems apply regardless of language, and solutions will be similar in other languages.
http://www.smashingmagazine.com/2010/10/18/common-security-mistakes-in-web-applications/

674 Remove Complex Backgrounds from Images in Photoshop - How-To Geek
While tools like the Magic Eraser can sometimes remove your backgrounds, the fact is you're going to have to get your hands dirty with the eraser if you have images with complex backgrounds that need removing. Windows, Windows Vista, Ubuntu, Programming, Networking, Firefox, Help, Solaris, Linux, Unix, VMware ,SQL Server, Oracle, MySQL, Analytics, Suse, Redhat, network security, firewall, postgresql,database, how to, how-to, howto, hints, tips, shell scripts, system administration
http://www.howtogeek.com/howto/29811/remove-complex-backgrounds-from-images-in-photoshop/

652 50 Great Web Alternatives to Desktop Software
Even without the help of the ground breaking features in HTML5, web apps have come of age. While not all web apps rival their desktop counterparts, some clearly apps,desktop,software,web
http://web.appstorm.net/roundups/50-great-web-alternatives-to-desktop-software/

636 The Beginner’s Guide to Zen Habits – A Guided Tour | zen habits
‘Smile, breathe and go slowly.’ ~Thich Nhat Hanh Post written by Leo Babauta. Follow me on Twitter. Note: This is an update to the old guide — so it should be interesting to readers new and old. While some of you have been following Zen Habits since its early days (beginning of 2007), many of you are fairly new readers. To help you through the fairly overwhelming archives, I’ve compiled a beginner’s guide. Kind of a Quick Start guide. First, a note: Please don’t try to go through this all at once. There are days and days worth of reading here. I’ve just organized that so that you can go to the stuff you want to learn about first. Take it in small chunks. Where do you start when you have a thousand posts to read through? You start with the best, or at least the most popular. So here they are: Most Popular Posts breathe. be still. a brief guide to life. the best goal is no goal the lost art of solitude the elements of living lightly the zen of doing The Ultimate How to Get Lean Guide. simplify, and savor life How Not to Hurry Email Sanity: How to Clear Your Inbox When You’re Drowning the barefoot philosophy The No. 1 Habit of Highly Creative People How Not to Hurry The Simple, Ridiculously Useful Guide to Earning a Living from Your Passion 10 Benefits of Rising Early, and How to Do It 20 Things I Wish I Had Known When Starting Out in Life Simple Living Manifesto: 72 Ideas to Simplify Your Life A Guide to Creating a Minimalist Home Get Off Your Butt: 16 Ways to Get Motivated When You’re in a Slump
http://zenhabits.net/start/

602 Free Music Friday – Circuit Ben « GetLoFi – Circuit Bending Synth DIY
Circuit Ben is Killing Music Album now is free to download. Enjoy great catchy tunes and top notch production. This is a very good example melodic composition with circuit bent toys. Circuit_Ben_is_Killing_Music Download Background Info: Bent Stuff used: Casio sk1, Casio sk5, Casio sk100, Casio pt-20, Casio ks-03, Yamaha pss-11, Yamaha pss460, Hing Hon EK-001, Cheburashka!, Jim Bowen/Al Pacino dub siren, Super ultra mega, Fun-box (orgasm toy), Toy Koran (Quran), Cheap Chinese phone toys, Kung Fu toy, Captain Scarlet’s car, “Pound Shop” keyboard (cost £1 new.), Dragonball Z keyrings, Barbie keyboard, Fisher-price tape recorder (now dirty,dirty guitar amp.), George W Bush and probably about fifty circuits with a soldered output that were bent/killed while recording – auto-destruct! Non Bent Stuff: Mini Kaoss pad, Gameboy with Nanoloop, Melodica, 5-litre oil can guitar, Acoustic bass, Casio kx-101, Stylophone, Voice Ben Says that in general songs are as vague as possible and about nothing – that’s the story he is sticking to The Lyrics for “Allen” are from “Cocaine Blues” by Allen Ginsberg. All this was written and performed by Circuit Ben and produced by Lee Gregory – www.myspace.com/randomleeaudio
http://www.getlofi.com/?p=1687

551 The Top Idea in Your Mind
I realized recently that what one thinks about in the shower in the morning is more important than I'd thought. I knew it was a good time to have ideas. Now I'd go further: now I'd say it's hard to do a really good job on anything you don't think about in the shower. Everyone who's worked on difficult problems is probably familiar with the phenomenon of working hard to figure something out, failing, and then suddenly seeing the answer a bit later while doing something else. There's a kind of thinking you do without trying to. I'm increasingly convinced this type of thinking is not merely helpful in solving hard problems, but necessary. The tricky part is, you can only control it indirectly. [1] I think most people have one top idea in their mind at any given time. That's the idea their thoughts will drift toward when they're allowed to drift freely. And this idea will thus tend to get all the benefit of that type of thinking, while others are starved of it. Which means it's a disaster to let the wrong idea become the top one in your mind. What made this clear to me was having an idea I didn't want as the top one in my mind for two long stretches.
http://www.paulgraham.com/top.html

529 SynthesisWorkshops
synth modular Sound synthesis and sound design Music has brought pleasure and entertainment to mankind throughout the whole of history. Each person is by nature equipped with one of the most elaborate and emotional musical instruments; the human voice. Whenever people feel good music seems to fit the occasion, and it is considered quite natural to hum or sing a song. Musical instruments have brought their own moods to music and at the current moment in human evolution there is an enormous variety of musical instruments available. The twentieth century has seen the development of a range of new and exciting electronic musical instruments. These electronic instruments are very flexible, they can produce a wide range of timbres and can be amplified to whatever loudness level sounds best for the occasion. Most of these electronic instruments are played by a keyboard, but in essence the keyboard can be replaced by any electromechanical device that is able to transform a movement caused by a human interaction into an electrical signal that can drive the sound generating core of the electronic instrument. All sorts of technical and scientific developments have helped to create electronic instruments and the human interface to play them. Still, music is an art and not really a hard science, although music and sound have for a long time been subject to various scientific research. An important realization is that science can not really explain why much music is such a pleasure to listen to and such a joy to make. Which is not a bad thing, as probably no one is waiting for science to take the fun out of music by applying formalized rules and templates on what is also subject to ‘feel’. So, although this book covers techniques that lean heavily on scientific research, the application of these techniques will in general be aimed at creating fun. There are a lot of professionals working with sound and even more people that make music for their personal enjoyment. Mastery of sound synthesis is valuable to all of them. Still, it won’t be easy to please everyone with one single book, as some people will be more interested in how things work and others might want practical examples that just work. The aim of this book is that it can at least be used as a practical guide in workshops and courses in electronic music, covering some essential basics that are needed to operate the equipment used in sound synthesis in a way that makes some sense. Additionally it can be used to explore techniques to find out how they can help in the development of one’s own musical style. Sound synthesis is the art of creating sounds by using suitable electronic means, using either analog or digital electronic devices. Sound design is the art of creating particular sounds using sound synthesis techniques. The definition of sound design as used here might be confusing to some, as the name sound design is also used in the discipline in industrial design that occupies itself with how mass produced objects should sound. Examples are how the sound of cars or ladyshaves are ‘designed’ to sound pleasing while in use. Which of course has nothing to do at all with music or sound synthesizers. This book puts the emphasis on the various synthesis techniques for musical purposes and how to setup sound synthesizers to create a large range of characteristic musical sounds. The art of musical sound design is left to the artist.
http://www.xs4all.nl/~rhordijk/G2Pages/

523 Yamaha CS-01 Resonance Mod
Just to get this up here. I hope to make this clearer soon... This shows how you can modify the Yamaha CS-01 Mk1 to: 1) have variable resonance control, by hijacking the Breath Control VCF potentiometer a) remove the 10k resistor near the VCF chip. b) cut the traces (or lift the pins) of the Breath Control VCF pot that connect it to GND and the Breath Control jack. I lifted the pins just to avoid cutting PCB traces c) remove the 39k resistor tied to the wiper of the VCF pot. d) solder wires from one side of the pot and the pot wiper and run these wires over to the holes that used to contain the 10k resistor near the VCF chip e) I'd suggest adjusting the resonance trimmer that's near the VCF chip to make your new Resonance control self-oscillate near the end of the rotation. why? because this filter gets out of control in a very loud and dramatic way. I don't think this VCF chip was designed for stable self-oscillation - that may explain why, in the CS-01 Mk2, when they gave you analog control of the resonance, they used a different 24dB VCF chip. 2) have variable VCA "drone" by hijacking the Breath Control VCA potentiometer. a) remove the 1k resistor that grounds usually-closed terminal of the breath control jack to GND b) solder a 47k resistor from the ungrounded, non-wiper terminal of the pot to -9V. c) when the VCA drone pot is now fully on, you'll always get a DCO-VCF signal running to the power amp. this mod keeps the VCA only partially open, and you can still superimpose the EG over the drone. I did this because I don't have a spec sheet on the VCA chip and I didn't want to risk having the EG slamming the VCA while the drone was going full on (basically, I don't know the max CV that the VCA chip can tolerate). so if you just use the drone, you'll have to increase the volume at the power amp. But now the front-panel VCA slider actually becomes useful, since if you don't want the EG to affect the drone, just turn that down to nothing! Sorry I don't have actual pics of the mod up! Perhaps someday soon...
http://home.earthlink.net/~kerrybradley/id11.html

474 Why Intelligent People Fail
Why Intelligent People Fail Content from Sternberg, R. (1994). In search of the human mind. New York: Harcourt Brace. 1. Lack of motivation. A talent is irrelevant if a person is not motivated to use it. Motivation may be external (for example, social approval) or internal (satisfaction from a job well-done, for instance). External sources tend to be transient, while internal sources tend to produce more consistent performance. 2. Lack of impulse control. Habitual impulsiveness gets in the way of optimal performance. Some people do not bring their full intellectual resources to bear on a problem but go with the first solution that pops into their heads. 3. Lack of perserverance and perseveration. Some people give up too easily, while others are unable to stop even when the quest will clearly be fruitless. 4. Using the wrong abilities. People may not be using the right abilities for the tasks in which they are engaged. 5. Inability to translate thought into action. Some people seem buried in thought. They have good ideas but rarely seem able to do anything about them. 6. Lack of product orientation. Some people seem more concerned about the process than the result of activity. 7. Inability to complete tasks. For some people nothing ever draws to a close. Perhaps it’s fear of what they would do next or fear of becoming hopelessly enmeshed in detail. 8. Failure to initiate. Still others are unwilling or unable to initiate a project. It may be indecision or fear of commitment. 9. Fear of failure. People may not reach peak performance because they avoid the really important challenges in life. 10. Procrastination. Some people are unable to act without pressure. They may also look for little things to do in order to put off the big ones. 11. Misattribution of blame. Some people always blame themselves for even the slightest mishap. Some always blame others. 12. Excessive self-pity. Some people spend more time feeling sorry for themselves than expending the effort necessary to overcome the problem. 13. Excessive dependency. Some people expect others to do for them what they ought to be doing themselves. 14. Wallowing in personal difficulties. Some people let their personal difficulties interfere grossly with their work. During the course of life, one can expect some real joys and some real sorrows. Maintaining a proper perspective is often difficult. 15. Distractibility and lack of concentration. Even some very intelligent people have very short attention spans. 16. Spreading oneself too think or too thick. Undertaking too many activities may result in none being completed on time. Undertaking too few can also result in missed opportunities and reduced levels of accomplishment. 17. Inability to delay gratification. Some people reward themselves and are rewarded by others for finishing small tasks, while avoiding bigger tasks that would earn them larger rewards. 18. Inability to see the forest for the trees. Some people become obsessed with details and are either unwilling or unable to see or deal with the larger picture in the projects they undertake. 19. Lack of balance between critical, analytical thinking and creative, synthetic thinking. It is important for people to learn what kind of thinking is expected of them in each situation. 20. Too little or too much self-confidence. Lack of self-confidence can gnaw away at a person’s ability to get things done and become a self-fulfilling prophecy. Conversely, individuals with too much self-confidence may not know when to admit they are wrong or in need of self-improvement.
http://www.acceleratingfuture.com/michael/works/intelligentfailure.htm

440 A List Apart: Articles: Taking Advantage of HTML5 and CSS3 with Modernizr
Ten years ago, only the most cutting-edge web designers used CSS for layouts and styling. Browser support for CSS layouts was slim and buggy, so these people advocated for web standards adherence, while creating hacks that made CSS layouts work in all browsers. One hack that became widely used was browser sniffing: Detecting which browser and version the user had by looking at the navigator.userAgent property in JavaScript. Browser sniffing allowed for quick and easy code forking, allowing developers to target different browsers with different instructions. Today, CSS-based layouts are commonplace and every browser has pretty solid support for them. But now we have CSS3 and HTML5, and the situation is repeating itself—different browsers demonstrate varying levels of support for these new technologies. We’ve smartened up, however, and no longer employ CSS hacks nor use browser sniffing—an unreliable, poor practice. We’ve also convinced more and more clients that websites don’t need to look exactly the same in every browser. So how do we deal with this new but familiar problem? Simple: We use feature detection, which means that we do not ask the browser “who are you?” and make unreliable assumptions from there on. Instead we ask the browser, “can you do this and that?” It’s a simple way to test browser capabilities, but doing all these tests manually all the time gets tiresome. To solve that problem (and others), you can use Modernizr.
http://www.alistapart.com/articles/taking-advantage-of-html5-and-css3-with-modernizr/

366 How to Track Down Anyone Online
When you're trying to find someone online, Google's not the only game in town. In the last two years, a handful of new people search engines have come onto the scene that offer better ways to pinpoint people info by name, handle, location, or place of employment. While there's still no killer, one-stop people search, there are more ways than ever to track down a long-lost friend, stalk an ex, or screen a potential date or employee. The next time you wonder, "What ever happened to so-and-so?" you've got a few power people search tools to turn to. How to Track Down Anyone Online, software, productivity, technology, downloads, life hacks, hacker, lifehacks, computing, lifestyle, timesavers, health, internet, personal technology, DIY, projects, tricks, advice, backup, email, Mac, Windows, Firefox, Google, Yahoo, Gmail, keyboard shortcuts, household, HOWTO, how to's, tutorials
http://lifehacker.com/329033/how-to-track-down-anyone-online/

336 Change of Address: 20 Ways to Get to Know Your Neighbors
Being the new family on the block can be hard, especially if you’re even remotely shy. It can be hard to make friends, made even harder by the fact that almost everyone in the community already has their own group of friends. Still, there are lots of ways you can connect with them and it’s worth the effort required as there are several advantages to getting to know your neighbors. Whether it’s having someone to watch your home while you are on vacation or a helping hand when you desperately need one. Here are some tips to help you break the ice with your new neighbors
http://www.changeofaddress.org/blog/2010/20-ways-to-get-to-know-your-neighbors/

235 MATRIXSYNTH: Alesis Andromeda A6 Aurora Mod
This was a custom mod. I originally put a post up in August of 05 here. Anyone know the website where more info on this mod is hosted? I accidentally lost the link when mucking around with Blogger's settings a while back. This image via Photobucket Update: I found the original site but it is down. Some info and additional shots pulled from the Internet Archive Way Back Machine. You can find some thumbnails there, but most give you a 404 if you click on them for the larger shot. I pulled the large pics below before they are gone forever. "Alesis made Synthesis History when they released their Alesis Andromeda A6, an analog polysynth bred with new technology and classic analog sound! Sixteen awesome voices with two types of filters, a vast modulation system, and enough bells and whistles to make the Andromeda A6 THE most highly featured analog polysynth in existence. If it only had a sloped panel... SPECS: * Take one Andromeda, lightly used (but out of warranty - very important!) * Add one black on blue BETA Panel - because the pre-production beta panels were lacking the Pre- and Post-Filter Mix VIEW buttons, either the buttoncaps must be pulled off of the switches on the PCBs OR two holes need to be carefully drilled through the panel to accomodate. I drilled the holes after measuring about fifteen times each. * Tilt that panel at approx. the same slope as the Korg MS-20. Requires the extending of a couple of ribbon cables inside, and some pop-rivetted braces. Not too hard. * Custom wood endcheeks of nice Oak, plus a wood accent over the keyboard. I chose to go with thick, high quality wood to make Aurora more of a beast. * Replace all green LEDs with red high-intensity ones. This also required changing some resistor values to increase the brightness. * Replace the LCD with a Hantronix Blue-on-White display. Also, some resistor changes are needed. * Have a very agreeable Alesis burn a custom Boot EPROM with the custom-designed bootup screen below. * Build a custom top panel, complete with several additional controls (two joysticks, several switches and knobs) as well as a full 16-channel mixer with level and pan per channel, one for each of the 16 individual outs on the Andromeda. * Add lots of careful, hard work and time, and PRESTO - you have the Aurora A6! The Name: I went with Aurora for a couple of reasons. 1. Alliteration - AurorA - AndromedA - get it? 2. There is some legend/lore as to how the Alesis Andromeda got its name. Could be related to the Greek mythos. Could be related to the Andromeda galaxy. Could be darts thrown at dictionary pages :-) In any case, Aurora fits with the mythology bent because in Roman mythology, Aurora was the goddess of the dawn (Andromeda was rescued and married by Perseus in Greek mythos). Aurora also fits the 'celestial' thing as well, as the Aurora Borealis. Either way, it kept with what might have perhaps been Alesis' reasons for naming the Andromeda. 3. I just liked it. 4. The A6 is kept because this fits with Alesis' naming convention (QS8 = 81-key QuadraSynth, A6 = 61-key Analog). There is some rumor that A6 was a play on ASICs, the custom chips within Andromeda, but I'm assured this is just rumor :-) "
http://matrixsynth.blogspot.com/2010/01/alesis-andromeda-aurora.html

156 The Andromeda Strain - Wikipedia, the free encyclopedia
The Andromeda Strain (1969), by Michael Crichton, is a techno-thriller novel documenting the efforts of a team of scientists investigating a deadly extraterrestrial microorganism that rapidly and fatally clots human blood while, in other people, inducing insanity that mostly ended in the insane people committing suicide or murder-suicide. It became a New York Times Bestseller. This novel established Michael Crichton as a best-selling genre author.
http://en.wikipedia.org/wiki/The_Andromeda_Strain

101 - 201