100SILEX, de 0 100 s: may
1522 5 Simple steps to secure TT-RSS reader
secure tt-rss, tt-rss security 5 Simple steps to secure TT-RSS reader July 27, 2015 by Anand Leave a Comment secure-tt-rss-ft Share: share htpcBeginner We recently presented Tiny Tiny RSS to you as a great alternative to Google reader, which is one more way you can extend the functionality of your home server or your hosting space. Hopefully, you already exported your data from Google Reader. In this post, we will show you how to secure TT-RSS reader to prevent unauthorized access. Tiny Tiny RSS is an open source web-based news feed (RSS/Atom) reader and aggregator, designed to allow you to read news from any location, while feeling as close to a real desktop application as possible. As we previously explained, it makes an ideal candidate to replace Google Reader. While there are services like Feedly and Newsblur grabbing the crowd Google Reader, which some of you may prefer, there are a group of people who would like to run a RSS reader on their own server and keep things private. Assuming that you have already installed Tiny Tiny RSS on your alternative to Google reader or hosting space, we will now show you how to secure TT-RSS reader. Secure TT-RSS Reader One of the main reasons to move to an RSS aggregator like TT-RSS is maintaining your privacy. So if you do not secure TT-RSS reader well you are not only making your data available public but also making your system vulnerable to potential attacks. Choosing a strong username and password while setting your TT-RSS is the first basic thing that you can do to secure TT-RSS reader. Listed below are few more ways you can increase TT-RSS reader’s security. 1. Rename TT-RSS Folder One of the first lines of defense is to not use tt-rss in your URL to access your TT-RSS reader. To do this on your hosting account, use a folder name other than tt-rss while installing TT-RSS. On your Linux home server, edit /etc/tt-rss/apache.conf and change the first /tt-rss to something else. An example is shown below. TT-RSS Rename URL TT-RSS Rename URL After making the change, restart your TT-RSS and Apache to apply the changes: sudo service tt-rss restart sudo serivce apache2 reload Your TT-RSS reader is now available through the new URL (example: http://mydomain.com/myreader) only. Amazon Kindle Fire HDX 2. Enable SSL Accessing TT-RSS through http sends all information as unencrypted data. This could mean less privacy due to potential sniffing. The solution is to encrypt the data during transfer, which makes sniffing by hackers harder. To enable and enforce HTTPS access on Linux servers with Apache, install the following run-time libraries: sudo apt-get install libssl0.9.8 libpam0g openssl Restart your Apache server as shown above. You should now be able to access your TT-RSS reader with HTTPS. Note that you may have to have a SSL certificate generated. Refer to Apache documentation if you want to generate your own certificate. By default, the system will install self-signed certificates for you. These certificates are likely to raise warnings when you point your browser to the site. 3. Disable Single User Mode By default the single user mode is already disabled (in /etc/tt-rss/config.php). Enabling single user mode will also disable TT-RSS login system. Therefore, keep the single user mode disabled. Disable Single User Mode Disable Single User Mode A better way to make it a single user system is by limiting the number of registrations to 1 as described below. For whatever reason, you still want to enable single user mode, make sure you implement Apache Authentication method described below. 4. Self Registrations Self registrations allow a visitor to register themselves, which could reduce TT-RSS security. If your TT-RSS will be for personal use only, then you may want to disable user registration by setting “ENABLE_REGISTRATION” to “false”. TT-RSS Self Registrations TT-RSS Self Registrations To further secure TT-RSS Reader, uou may also want to change “REG_MAX_USERS” to “1” to make your account the only account on TT-RSS. asus n66uASUS RT-N66U Dual-Band Wireless-N900 Gigabit Router asus n66u reviewsFind out why it is rated the best wireless router in its class. 5. Apache Authentication Last but not the least, enable Authentication. This is even more important if you have enabled “Single User Mode” describe above. Every time you access TT-RSS, you will be asked for a username and password as shown in the picture below: Secure TT-RSS Reader On your hosting account this equivalent to password protecting a directory, in this case the TT-RSS directory. To do this on your Ubuntu server, you will have to create a .htpasswd file. More information is available in Apache documentation. But the easiest way to achieve this is to use one of the htpasswd generators available online. After you enter the username and password two code blocks will be generated. Copy the contents of the .htpasswd code block and save it to /etc/apache2/.htpasswd_ttrss. Next, copy the contents of the .htaccess code block and add it to /etc/tt-rss/apache.conf as shown below: TT-RSS Apache Authentication TT-RSS Apache Authentication Save and exit. Restart both TT-RSS and Apache previous shown above. You should be prompted for a password every time you try to access TT-RSS. Some may think that this double authentication method is an extra inconvenience. But I would rather be safe than sorry. Go ahead, secure Tiny Tiny RSS Reader and enjoy reading articles on your private secure RSS Reader.
http://www.htpcbeginner.com/secure-tt-rss-reader/

1386 Retro Synth Ads: Sound Master Memory Rhythm SR-88, Keyboard 1982
Sound Master Memory Rhythm SR-88 drum machine 1-page advertisement from page 67 in Keyboard Magazine August 1982. Hmmm. Not sure how I feel about this ad. There just seems to be a lot going on. For example, am I supposed to know who "The Rhythm Section" is? The fact that they include themselves in an already long ad title suggests they must be some kind of a big deal. And then you find their name again in the bottom left-hand corner: "The SR-88. Another innovative product from The Rhythm Section by Sound Master Distributed exclusively by JTG of Nashville." So, let me get this straight. JTG of Nashville is the distributor of the SR-88 which was created by The Rhythm Section which is somehow owned or operated by Sound Master. That is waaaaay to much information. Sounds like something political is going on there, and readers unfortunately get stuck in the middle of it. There also seems to be a lot of ad-copy which actually doesn t give me much information. Reason #4 gives readers the most info including instant stop/start, variable tone and output switches, and a write/play mode indicator. The most I glean out of the four other reasons put together is: 16 rhythms, clock pulse and a price of under $200. The actual specs that are probably most important to potential buyers are inexplicably shoved into the bottom right-hand corner. Luckily for me, there are a few resources on the Web with more information about this beast. Unluckily for blog readers, as soon as I started looking for more info, I got swept up in a certain SR-88/Boss DR-55 controversy. Comparing the SR-88 and Boss DR-55 One of the first Web sites I hit while looking for info on the SR-88 was Dubsounds.com. The site includes a great little write-up on the SR-88, but, more interesting was finding out about a little controversy about whether the SR-88 or the very similar Boss DR-55 came out first. The two do seem mighty similar in functionality. For comparison purposes, I did a quick search on MATRIXSYNTH to find more photos. . A great photo of a gray SR-88 can be found in this December 2005 SR-88 MATRIXSYNTH auction post and the less common, but definitely more cool, blue SR-88 can be seen in this January 2011 MATRIXSYNTH auction post. Comparing the two to the Amdek RMK-100 Interestingly, it s not just these two machines that look and function similarly. In this May 2009 MATRIXSYNTH SR-88 auction post commenter "PAC" notices: "Interesting. I have an Amdek RMK-100 (sold as kit), very similar!" Never heard of it, so I Googled "Amdek RMK-100" to see just how similar it was to both the DR-55 and the SR-88. Turns out (according to the Internet) that Amdek products were made by Boss/Roland back in 80s, and, not only that, but that the RMK-100 is actually the kit version of the Boss DR-55. Makes sense on why it would also be similar to the SR-88. I found an ebay auction for an Amdek RMK-100 going on right now with a great photo of the front panel (see below), and indeed it does share a lot with the DR-55 and SR-88 - but definitely not identical to either one. For example, it looks like the Amdek and SR-88 share a similar filler function that as far as I can tell is not available on the DR-55. And the DR-55 and the RMK-100 share a similar accent function that I don t see on the SR-88. Now where does the Electro Dynamics Corporation Programmable Rhythm SR-99 fit in? I also came across another machine with similar features - the Programmable Rhythm SR-99. No - not manufactured by Sound Master, but by Electro Dynamics Corporation. And, it too resembles the others in functionality, and especially the SR-88 in design also. I ve included a row of photos below to help make the comparison between the two. The SR-88 photo is from the 2005 MATRIXSYNTH auction post and the EDC SR-99 photo is from the excellent BigBlueWave.co.uk site. I ve also thrown in a photo from another recent E-bay listing that included both - plus boxes and manuals! Sick! Obviously, Sound Master and EDC are somehow connected, although I can t find any info on the Internet concerning these two companies. I do know that they were both advertising separately in Keyboard Magazine in late 1983, making it unlikely that one of the companies changed their name to the other. Anyone know anything? And then there is the Clef Master Rhythm... Now, I m going to throw in a late entry. It s Sunday night, and I just came across this August 2010 MATRIXSYNTH auction post for the Clef Master Rhythm. It not only shares part of the name of one of the other units ("Master"), it too has many features of the other rhythm machines, and identical innards as the DR-55, but is expanded to include even more sounds: "This is essentially a fully expanded Boss DR-55 feature-wise and tone-wise. The circuits are identical (schematically and tonally) to the Boss DR-55, but the Clef Master Rhythm gives you way more instruments than the Boss DR-55..." Interestingly, according to the post, it pre-dates the Boss DR-55 - and also came in a kit form like the Amdek. "The Clef Master Rhythm came out a little before the Boss DR-55 in late 1979/early 1980. It was sold in two versions and available in greater quantities in Europe than in the United States. One version was a kit that the user put together and another one was a prebuilt machine." A photo from the MATRIXSYNTH post really helps show the similarities in functions with the others: What does it all mean? So, looking at all five machines, its almost like there was a rhythm machine salad bar of some sort in Japan, and each company stepped up to it and picked out which features they wanted to include in their product. And that begs the question - since we know there was a kit form available and there are claims that the Clef Master even has the same circuits as the DR-55, could all five products (and probably others) have used the exact same internal parts - each company choosing which features to include and then customizing in their respective rhythm machine? And if so, were those parts supplied by Amdek, or did all five get their internal parts from some other manufacturer? And if that is the case, then the question of whether the SR-88 or DR-55 came first doesn t really matter much, since it is likely that the kit components would have been available first. Plus, we have that one auction post with the claim that the Clef Master came out before the DR-55 - making it all even more confusing to figure out. Or, am I totally off the mark on all this? Were they all created separately? Maybe I ve just been fixated on this a little too much... I ll keep on looking for more info on these companies and any connection they might have, but if anyone want to buy all four and open them up to take a look - it would be muchly appreciated. :D Posted by RetroSynthAds at 12:05 PM Labels: 1982, amdek, clef master, dr-55, drum machine, electro dynamics corporation, keyboard magazine, rmk-100, Sound Master, sr-88, sr-99 2 comments: Simon said... Here s a funny thing - I seem to remember Clef in the early 1980s as a British company that made electronic pianos (touch-sensitive ones!) in kit form. Deep in the back of my mind I recall seeing them at a music fair in London with a couple of their pianos and some drum machines including a prototype drum/bass/chord sequencer called something like a "Band-Box". But it WAS a long time ago. February 12, 2012 at 12:36 PM Simon said... Looks like (for once) my memory didn t fail me. Here is a 1982 ad for Clef Electronics showing all the products I mentioned, plus a natty-looking little monosynth! BTW, I owned an EDC SR99 drum machine in the mid-1980s, but replaced it with a Yamaha RX-21 a couple of years later. February 12, 2012 at 12:46 PM
http://retrosynthads.blogspot.fr/2011/08/sound-master-memory-rhythm-sr-88.html

1364 FRACTAL Software
Contains several galleries of fractal images, wallpapers, fractal music, and discussions on fractals as art. It also includes an extensive up-to-date list of freeware fractal generators, screen savers and fractal music software, with links and reviews fractovia, fractal, art, pictures, images, graphics, software, freeware, programs, generator, tutorial, wallpaper, Mandelbrot, Ultra, Julia, Gingerbread, Lyapunov, TieraZon, Tiera, zon, Sierpinski, Fractint, iteration, Winfract, Xaos, ChaosPro, FractMus, quaternion, Lindenmayer, Musinum, Volterra, Lotka, IFS, chaos, digital, layer, Windows, Win, Macintosh, Mac, PowerPC, PC, BeOS, Linux, Debian, Ubuntu, screensaver, screen, saver
http://www.fractovia.org/art/fractal_generators/gen02.shtml

1255 Sony Cassette Walkman Overview (1979 - 2003) - sonyvintage.com
Unofficial SONY vintage page Skip to content Home Personal Audio HiFi about sonyvintage.com My Collection ← Sony WM-WE1 (1997) Cassette Walkman 1979 → Sony Cassette Walkman Overview (1979 – 2003) Posted on February 18, 2012 by Quo TPS-L2 WM-2 WM-3 WM-3Ex WM-R2 WM-F2 WM-D6 WM-7 WM-DD WM-F5 WM-20 WM-F20 WM-DC2 WM-D6C WM-DDII WM-F15 WM-R15 WM-30 WM-F30 WM-40 WM-75 WM-F75 WM-F55 WM-55 WM-W800 WM-R55 WM-F85 WM-101 WM-F101 WM-F202 WM-R202 WM-F60 WM-57 WM-60 WM-F107 WM-D3 WM-109 WM-F109 WM-101 WM-102 WM-104 WM-F203 WM-51 WM-51 with radio WM-501 WM-504 WM-503 WM-509 WM-550C WM-52 WM-505 WM-701C WM-F701C WM-506 WM-F506 WM-F606 WM-609 WM-170/171/172 WM-F180 WM-F181 WM-607 WM-DD9 WM-R707 WM-F707 WM-702 WM-F702 WM-703C WM-507 WM-F507 WM-600 WM-190 WM-805 WM-EX80 WM-EX60 WM-EX70 WM-FX70 WM-EX85 WM-FX85 WM-EX90 WM-SX77 WM-WX88 WM-GX90 WM-EX88 WM-EX77 WM-FX77 WM-DX100 WM-EX78 WM-RX77 WM-EX66 WM-EX909 WM-GX77 WM-FX909 WM-EX707 WM-FX707 WM-FX505 WM-WX808 WM-EX606 WM-EX808/808HG WM-FX808 WM-GX707 WM-RX707 WM-EX999 WM-FX999 WM-EX777 WM-FX777 WM-EX555 WM-WX777 WM-EX666 WM-EX1・EX1HG WM-FX1 WM-EX511 WM-FX811 WM-EX911 WM-EX811 WM-GX711 WM-EJ95 WM-WX1 WM-GX312 WM-EX2 WM-FX2 WM-EX622 WM-FX822 WM-EQ2 WM-GX622 WM-EX922 WM-GX822 WM-RX822 WM-EX633 WM-EX641 WM-EX5 WM-FX5 WM-EX3 WM-FX833 WM-GX322 WM-MV1 WM-GX622 WM-GX655 WM-EQ3 WM-FX855 WM-WE1 WM-WE7 WM-FS1 WM-EX655 WM-EX7 WM-EQ5 WM-FK2 WM-EK1 WM-EQ9 WM-EX9 WM-EX677 WM-GX677 WM-FX877 WM-WE01 WM-FK5 WM-EK3 WM-EX20 WM-EX900 WM-EX600 WM-GX323 WM-GX200 WM-FX200 WM-EX2000 WM-EX910 WM-EX610 WM-EX615 WM-GX688 WM-GX400 WM-EX921 WM-EX621 WM-FX888 WM-EX631 WM-FX202 WM-GX202 WM-GX788 +22 0 This entry was posted in Cassette Walkman. Bookmark the permalink. ← Sony WM-WE1 (1997) Cassette Walkman 1979 → Leave a Reply Your email address will not be published. Required fields are marked * Name * Email * Website Comment You may use these HTML tags and attributes:
Recent Posts Minidisc Walkman 2003 Minidisc Walkman 2002 Minidisc Walkman 2001 Minidisc Walkman 2000 Minidisc Walkman 1999 Minidisc Walkman 1998 Minidisc Walkman 2004 Minidisc Walkman 2005 Minidisc Walkman 2006 Minidisc Walkman 1997 Minidisc Walkman 1996 Minidisc Walkman 1995 Minidisc Walkman 1993 1994(us) Minidisc Walkman 1992 Sony TPS-L2 SOUNDABOUT (1979) Sony MZ-R91 MD Minidisc Walkman (1999) Sony MZ-R30 MD Minidisc Walkman (1996) Sony MZ-R2 MD Minidisc Walkman (1993) Sony MZ-E800 MD Minidisc Walkman (2000) Sony MZ-E90 MD Minidisc Walkman (1999) Sony MZ-E80 MD Minidisc Walkman (1998) Sony MZ-E75 MD Minidisc Walkman (1999) Sony MZ-E55 MD Minidisc Walkman (1998) Sony MZ-RH1 / MZ-M200 Hi-MD Minidisc Walkman (2006) Sony WM-EX999 Cassette Walkman (1993) Sony WM-F404 Cassette Walkman (1988) Sony WM-F501 Cassette Walkman (1987) Sony WM-F15 Cassette Walkman (1984) Sony WM-FX1 Cassette Walkman (1994) Sony WM-F101 Cassette Walkman (1985) Recently Liked Posts CD WALKMAN DISCMAN (1991) Sony D-50 D-5 DISCMAN (1984) Sony WM-F107 Cassette Walkman (1987) Sony TPS-L2 WALKMAN (1979) Sony WM-109 Cassette Walkman (1986) Sony D-EJ815 CD WALKMAN (2000) Sony D-E999 CD Walkman (2000) Sony D-NE900 CD Walkman (2004) CD WALKMAN DISCMAN (1987) Sony WM-150 Cassette Walkman (1988) CD WALKMAN DISCMAN (2005) Minidisc Walkman 1992 Cassette Walkman 1986 Sony D-515 DISCMAN (1992) Sony D-EJ01 D-E01 DISCMAN (1999) CD WALKMAN DISCMAN (1990) Sony D-11 DISCMAN (1990) Sony WM-EX505 Cassette Walkman (1999) Sony D-100 D-10 DISCMAN (1986) Sony WM-51 CASSETTE WALKMAN (1987) Sony WM-701C CASSETTE WALKMAN (1988) Cassette Walkman 1988 Minidisc Walkman 2003 Sony D-20 Discman (1988) Cassette Walkman 1989 Sony D-50mkII DISCMAN (1985) Sony D-135 DISCMAN (1994) Sony Cassette Walkman Overview (1979 - 2003) Sony MZ-R50 MINIDISC RECORDER (1997) Sony WM-50 (1985) Sony WM-EX606 Cassette Walkman (1993) Sony MZ-RH1 / MZ-M200 Hi-MD Minidisc Walkman (2006) CD WALKMAN DISCMAN (1993) Sony D-33 DISCMAN (1991) Sony WM-EX80 Cassette Walkman (1990) Sony D-Z555 D-555 DISCMAN (1989) Recent Comments Brandon Edwards on OLIVIER SEKNAZI on Sony WM-D6C (1984) Brandon on sonyvintage.com wm-F2 1 Brandon on Sony WM-DD30 CASSETTE WALKMAN (1989) Vlad Sabbath on Traffic Pages Pages|Hits |Unique Last 24 hours: 1,154 Last 7 days: 7,160 Last 30 days: 24,957 Online now: 2 Old posts Proudly powered by WordPress.
http://www.sonyvintage.com/?p=1034

1191 instructables
Power tools such as Metal cutting mills and lathes, Drill presses, bandsaws, sanders and more may require .5HP to 2HP motors with the ability to fine ...
http://www.instructables.com/id/Use-a-Treadmill-DC-Drive-Motor-and-PWM-Speed-Contr/

1052 Lab Overview
Not that I recommend this level of excitement to everyone, but this is my lab. It is my basement, and as you may note from the disheveled ceiling tiles up above, having this much equipment has actually forced me to purchase a separate AC unit for the basement. So my trendy two-zone AC house has now magically become a three-zone AC house. Fortunately, I didn't need a furnace for down here. Equipment is great in the winter to heat your house! The lab has taken on a life of it's own over time... It started out as a single standard 7-foot 19" rack. Then it grew to two standard racks... Then it changed into three Ortronics Mighty-Mo 19" rack systems (because those are cool). As seen now, it has changed yet again into four separate rack cabinets. The cabinets are a bit pricey, so they aren't all the same vendor. Note to all, even if you find a really good price on Ebay, be aware that you still have to ship them, and they weigh a LOT! (This means, have lots of friends and lots of pizza/beer!) Nov'04 -- Well, things have moved even more! The equipment was beating the AC unit that ran for the basement. So instead of being a three-level, three-zone house, we had to upgrade to being a four-zone house. Go figure. As noted above, I would not recommend this path to anyone unless you have a good amount of business to drive it! All of the equipment here is used for testing and lab purposes, but easily serves as Proof of Concept lab for many consulting clients of mine. The recent change was that the crawlspace area under the kitchen area was excavated out and had a concrete floor poured making an enclosed little room. In addition, a large air handler (AKA Mongo AC Unit) was put into that specific room and a door was installed for access and physical separation! While all a very interesting project, it is a pain to move any equipment that you amass, so definitely plan ahead for this sort of activity!
http://smorris.uber-geek.net/lab.htm

1050 Frieze Magazine | Comment | Conrad Schnitzler
In the early 1960s, Conrad Schnitzler met Joseph Beuys in a bar in Düsseldorf. Beuys was at the start of his legendary run as a professor of ‘monumental sculpture’ at Düsseldorf’s Kunstakademie. Schnitzler was a sailor, who specialized in fixing the engines of merchant ships in nearby ports. Beuys took a liking to Schnitzler, inviting him to be one of his students. Schnitzler enrolled at the Kunstakademie, but dropped out a year or two later, much to Beuys’ dismay. If, as Beuys famously entreated, ‘everybody is an artist’, why did he have to go to school to be one? Schnitzler travelled for a few years, making metal sculptures and performance art. Then he took the metal sculptures he built during his time with Beuys, which he had covered in stark planes of black and white paint, dragged them all to a grassy field, and left them there.
http://www.frieze.com/comment/article/conrad-schnitzler/

1005 COIL MUTEK
Blue Rats Drip Drop Triple Sun Radio Westin The First Five Minutes After Violent Death 7.5mb MOV 5.0MB MOV Live @ Mutek 29may03 Visit FlightDynamics Audio - 85.2MB MP3 Return to Offnominal Scraps Comments to logickal23@gmail.com
http://www.offnominal.com/scraps/coil/

1003 goth in green | Flickr : partage de photos !
Lady Amaranth by Ara Maye gothic, goth, ladyamaranth, photographie, photos, photo
http://www.flickr.com/photos/lady_amaranth/3237456430/in/photostream

993 Bach MIDI Files - Download for free :: MIDIWORLD.COM
Biography | Recommended Recordings | Books and Printed Music MIDI Files 2 Part Inventions - John Sankey Inventio 1 [BWV 772] Inventio 2 [BWV 773] Inventio 3 [BWV 774] Inventio 4 [BWV 775] Inventio 5 [BWV 776] Inventio 6 [BWV 777] Inventio 7 [BWV 778] Inventio 8 [BWV 779] Inventio 9 [BWV 780] Inventio 10 [BWV 781] Inventio 11 [BWV 782] Inventio 12 [BWV 783] Inventio 13 [BWV 784] Inventio 14 [BWV 785] Inventio 15 [BWV 786] 3 Part Inventions - John Sankey Sinfonia 1 [BWV 787] Sinfonia 2 [BWV 788] Sinfonia 3 [BWV 789] Sinfonia 4 [BWV 790] Sinfonia 5 [BWV 791] Sinfonia 6 [BWV 792] Sinfonia 7 [BWV 793] Sinfonia 8 [BWV 794] Sinfonia 9 [BWV 795] Sinfonia 10 [BWV 796] Sinfonia 11 [BWV 797] Sinfonia 12 [BWV 798] Sinfonia 13 [BWV 799] Sinfonia 14 [BWV 800] Sinfonia 15 [BWV 801] Air Allemande in Amin [BWV.835] Brandenburg Concerto No. 2. 1st. Movement 2nd. Movement 3rd. Movement Brandenburg Concerto No. 3. Brandenburg Concerto No. 4. 1st. Movement 2nd. Movement 3rd. Movement Brandenburg Concerto No. 5. Brandenburg Concerto No. 6. - David Siu, M.D. 1st. Movement 2nd. Movement 3rd. Movement Cantatas Aria "Es ist vollbracht" from Cantata "Sehet, wir gehn hinauf gen Jerusalem" (BWV159) Aria from Cantata No. 14. Aria "Mein Freund ist Mein!" from Cantata No. 140. Duet from Cantata No. 140. Sinfonia From Cantata No. 106 Ich will den Kreuzstab gerne tragen, No. 56. - 1st. Movement Terzetto from Cantata No. 38 Wachet Auf Versus 1. from Cantata No. 140. Wacht Auf, ruft uns die Stimme from Cantata No.140. Komm susser Tod [BWV 478] Capriccio for a Departing Brother [BWV 992] Capriccio in E [BWV 993] Chromatic Fantasia & Fugue Concert for Two Harpshichords and Orchestra [BVW1060] Garrett Van Cleef Allegro Adagio Allegro Concertos - John Sankey Keyboard arrangements of concertos by other composers Concerto in D [BWV 972] Concerto in G [BWV 973] Concerto in Dmin. [BWV 974] Concerto in Gmin. [BWV 975] Concerto in C [BWV 976] Concerto in C [BWV 977] Concerto in F [BWV 978] Concerto in Bmin. [BWV 979] Concerto in G [BWV 980] Concerto in Cmin. [BWV 981] Concerto in Bb [BWV 982] Concerto in Gmin. [BWV 983] Concerto in C [BWV 984] Concerto in Gmin. [BWV 985] Concerto in G [BWV 986] Concerto in Dmin. [BWV 987] Duets - John Sankey Duet 1 [BWV.802] Duet 2 [BWV.803] Duet 3 [BWV.804] Duet 4 [BWV.805] Fantasia and Fugue in Amin. [BWV 561] English Suites John Sankey English Suite in A [BWV806] English Suite in Amin [BWV807] English Suite in Gmin [BWV808] English Suite in F [BWV809] English Suite in Emin [BWV810] English Suite in Dmin [BWV811] French Suites John Sankey French Suite in Dmin [BWV812] French Suite in Cmin [BWV813] French Suite in Bmin [BWV814] French Suite in Eb [BWV815] French Suite in G [BWV816] French Suite in E [BWV817] Fughetta [BWV 902] Goldberg Variations Goldberg Variations Italian Air with Variations [BWV 989] Italian Concerto [BWV 971] Italian Concerto - 1st movement Jesu Joy of Man’s Desiring Little Fugue in G minor Mass in Bmin. - David Siu, M.D. Kyrie Eleison Christe Eleison Kyrie Eleison Gloria Laudamus te Gratias agimus tibi Domine Deus Qui tolis Qui sedes Quoniam Cum sancto Credo in unum Deum Patrem omnipotentem Et in unum Et incarnatus & Crucifixus Et resurrexit Et in spiritum Confiteor Sanctus Osanna Benedictus Agnus Dei Dona nobis pacem Minuet in G [BWV 841] Partitas John Sankey Partita in Bb [BWV 825] Partita in Cmin [BWV 826] Partita in Amin [BWV 827] Partita in D [BWV 828] Partita in G [BWV 829] Partita in Emin [BWV 830] Partita in A [BWV 832] Prelude & Partita [BWV 833] Preludes & Fugues - John Sankey A minor [BWV.894] A minor [BWV.895] D minor [BWV.899] E minor [BWV.900] F major [BWV.901] Sonata in D [BWV 963] Sonata in Amin [BWV 965] Sonata in C [BWV 966] Sonata in Amin [BWV 967] Scherzo [BWV.844] Sheep May Safely Graze St. Matthew Passion [BWV 244] Bass Aria "Aus Liebe will mein Heiland sterban" soprano aria "Gebt mir meinen Jesum weider" bass aria "Blute nur, du liebes Herz" soprano aria "Erbarme dicht, mein Gott" alto aria "Herzliebster Jesu" chorus "Können Tränen meiner Wangen nichts erlangen" alto aria "Mache dich mein herz" bass aria "O Haupt voll Blut und Wunden" chorus "Wir setzen uns mit Tränen nieder" chorus Passacaglia & Fugue in C minor Sonata No. 1 in G minor for Solo Violin [BWV 1001] - David J. Grossman Adagio Fugue Siciliano Presto Partita No. 1 in B minor for Solo Violin [BWV 1002] - David J. Grossman Allemande Double(Allemande) Courante Double: Presto (Courante) Sarabande Double (Sarabande) Tempo di Borea Double (Tempo di Borea) Sonata No. 2 in A minor for Solo Violin [BWV 1003] - David J. Grossman Grave Fugue Andante Allegro Partita No. 2 in D minor for Solo Violin [BWV 1004] - David J. Grossman Allemande Courante Sarabande Gigue Chaconne Sonata No. 3 in C major for Solo Violin [BWV 1005] - David J. Grossman Adagio Fugue Largo Allegro assai Partita No. 3 in E major for Solo Violin [BWV 1006] - David J. Grossman Prelude Loure Gavotte en Rondeau Menuet I/II Bouree Gigue Suite No. 1 in G major for Solo Cello [BWV 1007] - David J. Grossman Prelude Allemande Courante Sarabande Menuet I/II Gigue Suite No. 2 in D minor for Solo Cello [BWV 1008] - David J. Grossman Prelude Allemande Courante Sarabande Menuet I/II Gigue Suite No. 3 in C major for Solo Cello [BWV 1009] - David J. Grossman Prelude Allemande Courante Sarabande Bouree I/II Gigue Suite No. 4 in Eb major for Solo Cello [BWV 1010] - David J. Grossman Prelude Allemande Courante Sarabande Bouree I/II Gigue Suite No. 5 in C minor for Solo Cello [BWV 1011] - David J. Grossman Prelude Allemande Courante Sarabande Gavotte I/II Gigue Suite No. 6 in D major for Solo Cello [BWV 1012] - David J. Grossman Prelude Allemande Courante Sarabande Gavotte Gigue Sonata - BWV 1032 (Arr. for recorder and harpsichord) Michael Beckenkamp Vivace Largo e dolce Allegro Suite No.3 in D, BWV.1068 Air Gigue Suite in Amin [BWV 818] Suite in Eb [BWV 819] Suite in F [BWV.820] Suite in Fmin [BWV 823] Toccatas John Sankey bwv910 Toccata in F# bwv911 Toccata in Cmin bwv912 Toccata in D bwv913 Toccata in Dmin bwv914 Toccata in Emin bwv915 Toccata in Gmin bwv916 Toccata in G Toccata and Fugue in D minor Toccata and Fugue in D minor MINO Toccata, Adagio and Fugue in C, BWV 564. Toccata in D minor: The "Dorian" Trio Sonata No.6, [BWV 530] - Mauricio Fabbri Vivace Lento Allegro Triosonata for 2 flutes, harpsichord and continuo - Eduardo Moreno Adagio Allegro ma non presto Adagio Presto The Art of Fugue - No.1. The Well-Tempered Klavier John Sankey Prelude & Fugue No.1 in C [BWV 846] Prelude & Fugue No.2 in Cmin [BWV 847] Prelude & Fugue No.3 in C# [BWV 848] Prelude & Fugue No.4 in C#min [BWV 849] Prelude & Fugue No.5 in D [BWV 850] Prelude & Fugue No.6 in Dmin [BWV 851] Prelude & Fugue No.7 in Eb [BWV 852] Prelude & Fugue No.8 in Ebmin [BWV 853] Prelude & Fugue No.9 in E [BWV 854] Prelude & Fugue No.10 in Emin [BWV 855] Prelude & Fugue No.11 in F [BWV 856] Prelude & Fugue No.12 in Fmin [BWV 857] Prelude & Fugue No.13 in F# [BWV 858] Prelude & Fugue No.14 in F#min [BWV 859] Prelude & Fugue No.15 in G [BWV 860] Prelude & Fugue No.16 in Gmin [BWV 861] Prelude & Fugue No.17 in Ab [BWV 862] Prelude & Fugue No.18 in Abmin [BWV 863] Prelude & Fugue No.19 in A [BWV 864] Prelude & Fugue No.20 in Amin [BWV 865] Prelude & Fugue No.21 in Bb [BWV 866] Prelude & Fugue No.22 in Bbmin [BWV 867] Prelude & Fugue No.23 in B [BWV 868] Prelude & Fugue No.24 in Bmin [BWV 869] Prelude & Fugue No.25 in C [BWV 870] Prelude & Fugue No.26 in Cmin [BWV 871] Prelude & Fugue No.27 in C# [BWV 872] Prelude & Fugue No.28 in C#min [BWV 873] Prelude & Fugue No.29 in D [BWV 874] Prelude & Fugue No.30 in Dmin [BWV 875] Prelude & Fugue No.31 in Eb [BWV 876] Prelude & Fugue No.32 in Ebmin [BWV 877] Prelude & Fugue No.33 in E [BWV 878] Prelude & Fugue No.34 in Emin [BWV 879] Prelude & Fugue No.35 in F [BWV 880] Prelude & Fugue No.36 in Fmin [BWV 881] The Well-Tempered Klavier Book II. Jennifer Weir Prelude II Prelude XII Fugue XII
http://midiworld.com/bach.htm

962 25 Abandoned Soviet Monuments that look like they're from the Future | Crack Two
These structures were commissioned by former Yugoslavian president Josip Broz Tito in the 1960s and 70s to commemorate sites where WWII battles took place (like Tjentište, Kozara and Kadinjača), or where concentration camps stood (like Jasenovac and Niš). They were designed by different sculptors (Dušan Džamonja, Vojin Bakić, Miodrag Živković, Jordan and Iskra Grabul, to name a few) and architects (Bogdan Bogdanović, Gradimir Medaković...), conveying powerful visual impact to show the confidence and strength of the Socialist Republic. In the 1980s, these monuments attracted millions of visitors per year, especially young pioneers for their "patriotic education." After the Republic dissolved in early 1990s, they were completely abandoned, and their symbolic meanings were forever lost. From 2006 to 2009, Kempenaers toured around the ex-Yugoslavia region (now Croatia, Serbia, Slovenia, Bosnia and Herzegovina, etc.) with the help of a 1975 map of memorials, bringing before our eyes a series of melancholy yet striking images. His photos raise a question: can these former monuments continue to exist as pure sculptures? On one hand, their physical dilapidated condition and institutional neglect reflect a more general social historical fracturing. And on the other hand, they are still of stunning beauty without any symbolic significances. I know this may sound schizophrenic if you also read my last post. But maybe there are forms that can transcend meaning...
http://www.cracktwo.com/2011/04/25-abandoned-soviet-monuments-that-look.html

865 Evolver.html
Just Beautiful! What an amazing instrument! The DSI Evolver has the signature "old school" timbre down pat as well as being able to provide digital timbres reminiscent of the Waldorf Q. There's certainly a "rougher" side available as well with all the feedback implementation and controled distortion. Being able to make PM type plucked and blown sounds is just icing on the cake. Dave Smith should be commended for a job well done. Just have a look at the Panel Layout to get a taste of what this beauty can dish out - the controls are pretty much laid out in the form of a signal path graphic. Be sure to visit Dave Smith's Website! Evolver Sound Examples There are a lot of demos of the Evolver on the web showcasing the gutsy harsh sounds of this beast so I decided to post demos of some of my own patches as examples of the "softer" more "vintage" side of the Evolver's timbre. I make no apologies for these unpolished recordings - these are merely sound samples ;) Resonant Plucked Pad This pad shows some of the rich resonant nature of the filter. Soft Lead This is a simple analog brass lead patch. FM Pad A fun patch with lots of motion made using my "Audio-rate Filter FM" programming tip below. Warm Pad A nice bland-vanilla pad ^_^ What can I say? I love pads... For more MP3 demos showing the full gamut of sounds the Evolver and Polyevolver are capable of, please visit the excellent website of Stefan Trippler! The Definitive Guide to Evolver This rather in-depth guide to the Evolver goes places and does things a mere manual can't. This labor-of-love was crafted by Anu Kirk and with his kind permission, I am offering this fantastic resource right here in PDF format! A much smaller version (400K) is here but it dosen't have internal hyperlinks. Programming Tips Here's a fun repository of programming tips for the Evolver in all its incarnations. Please email me if you would like to add some. Fingered Wave Sequence Submitted by Dave Bryce. This brilliant technique has to be heard to be believed! Plus, its one of those cool things unique to the Evolver! This particular tip is so full of detailed information that it gets its own page! Audio-rate Filter FM Submitted by James Maier. Use the "Audio Mod" parameter in the Filter section to frequency-modulate the cutoff with the analog oscillator. Add resonance until the filter is just on the edge of oscillation then mod the cutoff with just a little triangle LFO set at a very slow speed. Amazing moving chorusing pad and lead sounds can be made this way. Fatter Bass/Pad Sounds Submitted by Mike Peake. Set the same sound in both channels (detuned saws, for instance). With the filters at the 24dB setting, increasing resonance cuts the passband as on the Moog filters. Set Envelope 3 to minimum attack, maximum decay and release, and sustain to maximum. This "creates" an offset, a continuous "on" signal while the keys are gated. Modulate one filters' resonance up (just one), or of the overall resonance level is high, us it to modulate one filters' resonance to its minimum. You get the resonant character plus the size of the non-resonant filter. Use Tri and Sine waves on that side too. "Warmer" Sounds Submitted by James Maier. The Evolver can make many ultra-bright and buzzy sounds due to its extensive feedback and distortion stages but sometimes people miss the subtler side of the beast. For a warmer sound use little or no distortion, close the filter just a bit and turn off the feedback and delay lines. I've managed to get dead-on Prophet5 timbres this way. Adding "Punch" Submitted by Mike Peake. Set the envelopes to linear, and use a Mod to modulate AmpEnv All by itself (lin through log responses with positive and negative self-modulation). This is of course fun on the filter envelopes as well. More Vintage Character Submitted by Mike Peake. Oscillator Slop, set at 5, doesn't come close to the Moog and other old-timer movement, so add slight (1 or 2) LFO to pitch modulations, with individual LFOs per oscillator, and a touch of LFO to LFO rate modulation. A tad of Envelope 3 to pitch helps as well. Don't miss out on the 12dB filter setting Submitted by Mike Peake. The 24dB setting has much more resonance, but the 12dB setting can sound nice and plucky, and do nice slightly fuzzy pads etc. DSI Evolver Waveshape Charts Below are charts I've assembled of the digital waveforms and their spectra as currently used in the DSI Evolver synthesizers. Originally these waves were unique to the SCI ProphetVS vector synth. I find these waveform/spectra graphics really usefull when programming sounds - maybe you will as well. Pay special attention to the spectra as this info is sometimes much more useful than waveshape in determining actual timbre - even before you hear what the waveform sounds like. These are designed to be downloaded (right-click & "save target as"), and printed at 300dpi on 8.5" x 11" pages - don't resize these images before printing or you will lose useful detail. Use them as a handy refrence. This information was cobbled together from various scattered sources (with very special thanks to Achim Gratz!). Any errors or omissions are my own. ^_^ HAVE FUN!!! Page 1 Page 2 Page 3 Page 4 As far as the origin of these waves is concerned, one of the original VS engineers, Chris Meyer, said: "The original waves for the VS were created three ways - extracting single-cycles from sampled sounds, using a custom additive synthesis program, and using a program Josh (Josh Jeffe, another VS engineer) slapped together called "Hacker" where you could draw the waveshape. These were fed straight from the computer through the filter and VCA of a Pro-One to figure out what they might sound like in a patch. And by the way, no PPG waveforms appear inside the VS - we had access to them, but in the end our consciences got the better of us. We did steal some waveforms from the Korg DW6000, but only by looking at the harmonic drawings on the front panel and trying to imitate them in our additive synthesis program." Modulation Matrix "Cheat Sheet" This chart shows all the modulation routing available on the Evolver. This same info is available in the manual but this can be printed on a single sheet of paper as a handy refrence! Evolver Wallpaper These I created just for fun and desktop "beautification" ;) 1280 X 1024 1024 X 768 800 X 600
http://www.carbon111.com/evolver.html

767 The 5 types of programmers « Steven Benner's Blog
In my code journeys and programming adventures I’ve encountered many strange foes, and even stranger allies. I’ve identified at least five different kinds of code warriors, some make for wonderful comrades in arms, while others seem to foil my every plan. However they all have their place in the pantheon of software development. Without a healthy mix of these different programming styles you’ll probably find your projects either take too long to complete, are not stable enough or are too perfect for humans to look upon. The duct tape programmer The code may not be pretty, but damnit, it works! This guy is the foundation of your company. When something goes wrong he will fix it fast and in a way that won’t break again. Of course he doesn’t care about how it looks, ease of use, or any of those other trivial concerns, but he will make it happen, without a bunch of talk or time-wasting nonsense. The best way to use this person is to point at a problem and walk away. The OCD perfectionist programmer You want to do what to my code? This guy doesn’t care about your deadlines or budgets, those are insignificant when compared to the art form that is programming. When you do finally receive the finished product you will have no option but submit to the stunning glory and radiant beauty of perfectly formatted, no, perfectly beautiful code, that is so efficient that anything you would want to do to it would do nothing but defame a masterpiece. He is the only one qualified to work on his code. The anti-programming programmer I’m a programmer, damnit. I don’t write code. His world has one simple truth; writing code is bad. If you have to write something then you’re doing it wrong. Someone else has already done the work so just use their code. He will tell you how much faster this development practice is, even though he takes as long or longer than the other programmers. But when you get the project it will only be 20 lines of actual code and will be very easy to read. It may not be very fast, efficient, or forward-compatible, but it will be done with the least effort required. The half-assed programmer What do you want? It works doesn’t it? The guy who couldn’t care less about quality, that’s someone elses job. He accomplishes the tasks that he’s asked to do, quickly. You may not like his work, the other programmers hate it, but management and the clients love it. As much pain as he will cause you in the future, he is single-handedly keeping your deadlines so you can’t scoff at it (no matter how much you want to). The theoretical programmer Well, that’s a possibility, but in practice this might be a better alternative. This guy is more interested the options than what should be done. He will spend 80% of his time staring blankly at his computer thinking up ways to accomplish a task, 15% of his time complaining about unreasonable deadlines, 4% of his time refining the options, and 1% of his time writing code. When you receive the final work it will always be accompanied by the phrase “if I had more time I could have done this the right way”. Where do you fit? Personally, I’d have to classify myself as the perfectionist. So, which type of programmer are you? Or perhaps you know another programming archetype that is missing from my list? Post a comment below and I’ll add it to a new updated list.
http://stevenbenner.com/2010/07/the-5-types-of-programmers/

701 How To Convince The Client That Your Design Is Perfect - Smashing Magazine
As designers who deal with clients, we all have to face one situation, no matter how difficult and uncomfortable, and that is guiding the client to accept that your design is perfect. Now, you already have the project, so this is not a matter of convincing them to pick you for the job. This is about getting them to see that your design satisfies their requirements and contains everything they want. We all have to take on this role of virtual tour guide and lead them through the project’s twists and turns, ensuring that the best interests of the client and website are served. We have to be the lighthouse, guiding the clients to shore. (Image credit) In the end, the final decision falls to the client, but there are times — and most of us have experienced them — when the client’s lack of expertise in the field affect the quality of the design. In such times, we have a responsibility to do everything in our power to convince the client that the design is perfect as it is, and that any further alteration would impair the website’s ability to communicate everything it needs to. This confrontation is not welcome by either party, but it is certainly necessary. Many designers want to avoid conflict and, as a result, cave to their clients at the slightest sign of disagreement, rather than spend time trying to convince them that they stand on the right side of the design decision. This is often a mistake and does not serve the design, which should be the paramount consideration. We owe it to our creative work to argue for whatever serves the design beyond all else, even though the client is footing the bill. We may end up having to give in to the client, but at least we tried. Below is an overview of some tips and techniques you can employ when you find yourself butting heads with a client. These approaches might work individually or in combination, but they all at least offer a launching point to help you put your best foot forward and lead the client exactly where they need to go.
http://www.smashingmagazine.com/2010/10/06/how-to-convince-the-client-that-your-design-is-perfect/

682 Geekologie -May 2007
Geekologie is website dedicated to the scientific study of gadgets, gizmos, and awesome.
http://www.geekologie.com/2007/05/

679 Trevor Marshall's ETI3600, ETI4600 International Music Synthesisers and Maplin 3800 and Maplin 5600s Stereo Synthesisers
Many years ago the Australian magazine "Electronics Today International" published my designs for two partly digital, mostly analog, Electronic Music Synthesisers. the ETI 3600 and ETI 4600. Both were made available as kits of components Barry Wilkinson at ETI was responsible for the final packaging and kitting coordination. Maplin Electronics Ltd.(in the UK) subsequently picked up the designs, which they marketed as as the Maplin models 3800 and 5600s Electronic Music Synthesisers At the time I held two Australian provisional patents for the technologies I used in the Synthesiser designs. One related to the method for generating sawtooth waveforms, the other was for the method of using commutated resistors in voltage controlled filters. I never made any money out of the designs, or the patents, which have long ago been allowed to lapse. But it was fun! The original constructional articles for the ETI 3600/4600 can be found in these PDFs: October 1973, December 1973, January 1974, Feb 1974, March 1974, April 1974, July 1974, March 1975, April 1975, May 1975, August 1975 Although the earliest (4004) microprocessors were available at that time, it was not until the late-70's that I first started programming fully digital (Signetics 2650 based) Microcomputer systems. Consequently my early digital designs were hardware, and not firmware, based. Of course, these days, everything in my hardware and firmware is based on software designs - even the interconnections are controlled by the software in the EPLDs and PALs, instead of by wires. So many things have changed over the years.... Here is a mug shot of the Maplin 3800:
http://www.trevormarshall.com/eti.htm

634 50 Free Expedient High-Resolution Fabric Textures | Naldz Graphics
Textures serve a big advantage in making websites and other graphics design projects better looking and efficient. Another great thing about it is that you can find it anywhere,in your town, maybe in streets, or even in your homes. Examples of this are fabric textures from your clothes, linen or any fabric materials you have. After capturing the texture it can help your blog in making it more effective and giving it a nice touch. In our next post, we will be showcasing 50 Free Expedient High-Resolution Fabric Textures. We have collected some of the beautiful fabric textures that have different designs for you to choose from. They all are high-resolution images and best of all, they all come for free. Don’t hesitate to check them out, these showcase may include the texture that will suite your taste. Come, take a peek, and choose your pick.
http://naldzgraphics.net/freebies/50-free-expedient-high-resolution-fabric-textures/

612 dictée magique Bend me I'm famous
Speak and Spell Posted in Speak and spell, circuit bending with tags bent, circuit bending, dictée magique, LFO, speak and pell, trigger in on May 5, 2010 by bendmeimfamous Ma dictée magique anglaise, dans un boitier français…. Un trigger in permettait de la faire jouer grace au séquenceur anaologique de l’atari punk bassline. Maintenant elle est en midi avec un kit highly liquid, midispeak 2. Une LFO casper electronics, a été monté. Pour les deux sorties jack en façade, la première est pour l’audio la seconde est pour l’entrée trigger in.
http://bendmeimfamous.wordpress.com/tag/dictee-magique/

608 Stories In Flight | HTML5/CSS3 Cheatsheet
Here are some simple cut-and-paste examples of HTML5/CSS3 features that are currently (mid-2010) usable across a number of web browsers, chief among them Firefox, Safari, Chrome and Opera. For many of the CSS3 examples, Internet Explorer is the lone holdout with a limited number of workarounds, however these features degrade gracefully and may still be useful on new projects as long as this limitation is kept in mind. Both for SVG and Canvas there exist solid workarounds in the form of JavaScript libraries that allow even Internet Explorer to display these new objects, and in the case of SVGweb it may be a good idea to use this workaround for all browsers to limit the variability of the SVG rendering across platforms. Please note: With the exception of SVGWeb, no Internet Explorer workarounds have been included on this page - most of the examples will therefore not work in IE6, IE7 or IE8. And if you want to discuss any of the code below or leave a correction or suggestion, you can leave comments below and here is also The Web We Should Have on my blog. Thanks! On this page: HTML5 DOCTYPE Rounded Corners Rounded Corners Redux: Circles Box Shadows Text Shadows Border Images Transform Rotate Column Layout SVG Canvas Canvas Text Canvas Text Rotate Some more complex subjects are also discussed in these separate pages: CSS3 Transforms Ruby Annotations Multiple Background Images HTML5 Audio and JavaScript Control HTML5 Audio Data API - Spectrum Visualizer JavaScript: Binary Loader Google Font API and Font Loading Behavior JavaScript: Sorting DIVs JavaScript: HTML5 Video with SRT Subtitles ...and don't forget to leave some comments below!
http://www.storiesinflight.com/html5/

596 Eventide
Accessories Eventide PitchFactor Support Links ›Documentation ›Software Updates ›PitchFactor Support ›Knowledge Base ›Forum Find a Dealer No Comparison Nothing Sounds Like an Eventide Through the decades, top players have depended on Eventide: Jimmy Page, Frank Zappa, Brian May, Eddie Van Halen, Steve Vai, Robert Fripp, John Petrucci, and Adrian Belew, to name a few. Now, for the first time these effects are portable AND affordable. Stompbox simple, PitchFactor fits on your pedalboard or in your gigbag. Features Specifications Photos Media Studio Quality Effects at Your Feet Top recording studios worldwide use Eventide effects on hit after hit. PitchFactor includes Eventide's best pitch-changing effects from the past 39 years without compromising quality OR flexibility. Flexibility Built-In Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals. Obsolescence is so 20th Century Easy to upgrade; download new software from the Internet and install via USB. Features 10 of Eventide’s signature stereo or mono pitch+delay effects: Diatonic PitchFlex™ Quadravox™ Octaver™ HarModulator™ Crystals™ MicroPitch HarPeggiator™ H910 / H949 Synthonizer™ Up to 4 voices of diatonic pitch shifting and up to 1.5 seconds of stereo delay Studio quality sound Guitar or bass compatible Built-in Tuner Software upgradeable via USB 2.0 MIDI control via USB or MIDI in, out/thru Instant program change Real-time control with 10 knobs, MIDI, or expression pedal Tap tempo and MIDI clock sync 100 factory presets, unlimited through MIDI True analog bypass Rugged cast metal construction Reliable metal footswitches for instant preset access Mono or stereo operation Guitar or line level inputs and outputs
http://www.eventide.com/AudioDivision/Products/StompBoxes/PitchFactor.aspx

574 26 Essential Social Media Resources You May Have Missed
We're back with a brand new edition of great Mashable resources you may have missed. Check it out! Business Lists,Channels,Lists,Mobile Lists,Social Media Lists,business,facebook,features,social media,twitter,youtube
http://mashable.com/2010/08/22/essential-resources-roundup-3/

565 Inside Alesis A6 Andromeda | Ibsendesign blog
Inside Alesis A6 Andromeda Here are some pics I’ve shot during the reconnaissance inside my A6 (taking some measures before pimping it with some custom made wooden cheeks). It’s quite surprising that its guts are not that complicated as it may seem looking at it’s interface. Very clean layout and good engineering (with tons of silicone glue, WTF?). The only con is that in order to remove those original cheeks I have to disassemble all the PCB’s attached to the front panel – and probably all the pots! Teh drama.
http://www.blog.ibsendesign.pl/?p=81

559 50 Useful Tools and Resources For Web Designers - Smashing Magazine
Related Posts You may be interested in the following related posts: 50 Powerful Time-Savers For Web Designers 50 New Useful CSS Techniques, Tools and Tutorials 45... web design, magazine, html, photoshop, wordpress, wallpaper, icons
http://www.smashingmagazine.com/2010/07/26/50-useful-tools-and-resources-for-web-designers/

547 Din Sync: How to modify a Korg Monotron
So here's how to modify Korg's new Monotron analog ribbon synthesizer. Perhaps this is the first document of Monotron mods in Europe since it still hasn't been released here. It's actually a very easy machine to modify because for whatever reason Korg decided to label all the interesting points on the bottom side of the PCB. This may well have been for testing units at the factory/service centers. Perhaps though it could have been that the designers anticipated this little machine would be hacked, much like the Gakken which pretty obviously inspired this piece. Incidentally in the magazine that comes with the Gakken there's a picture of them showing it to Korg, that was in 2008, go figure.
http://www.dinsync.info/2010/06/how-to-modify-korg-monotron.html

534 Synth Secrets: Links to All Parts
This page contains links to every part of Gordon Reid's hugely popular SYNTH SECRETS series which ran for over five years in Sound On Sound magazine (May 1999 to July 2004). Synthesizers, Synthesisers, synthesis, sound synthesis, analogue synthesis, FM synthesis, digital synthesis, yamaha synth, Roland synth, ARP syths, Prophet synthesizers, Moog synths, sound manipulation, Gordon Reid,
http://www.soundonsound.com/sos/allsynthsecrets.htm

523 Yamaha CS-01 Resonance Mod
Just to get this up here. I hope to make this clearer soon... This shows how you can modify the Yamaha CS-01 Mk1 to: 1) have variable resonance control, by hijacking the Breath Control VCF potentiometer a) remove the 10k resistor near the VCF chip. b) cut the traces (or lift the pins) of the Breath Control VCF pot that connect it to GND and the Breath Control jack. I lifted the pins just to avoid cutting PCB traces c) remove the 39k resistor tied to the wiper of the VCF pot. d) solder wires from one side of the pot and the pot wiper and run these wires over to the holes that used to contain the 10k resistor near the VCF chip e) I'd suggest adjusting the resonance trimmer that's near the VCF chip to make your new Resonance control self-oscillate near the end of the rotation. why? because this filter gets out of control in a very loud and dramatic way. I don't think this VCF chip was designed for stable self-oscillation - that may explain why, in the CS-01 Mk2, when they gave you analog control of the resonance, they used a different 24dB VCF chip. 2) have variable VCA "drone" by hijacking the Breath Control VCA potentiometer. a) remove the 1k resistor that grounds usually-closed terminal of the breath control jack to GND b) solder a 47k resistor from the ungrounded, non-wiper terminal of the pot to -9V. c) when the VCA drone pot is now fully on, you'll always get a DCO-VCF signal running to the power amp. this mod keeps the VCA only partially open, and you can still superimpose the EG over the drone. I did this because I don't have a spec sheet on the VCA chip and I didn't want to risk having the EG slamming the VCA while the drone was going full on (basically, I don't know the max CV that the VCA chip can tolerate). so if you just use the drone, you'll have to increase the volume at the power amp. But now the front-panel VCA slider actually becomes useful, since if you don't want the EG to affect the drone, just turn that down to nothing! Sorry I don't have actual pics of the mod up! Perhaps someday soon...
http://home.earthlink.net/~kerrybradley/id11.html

474 Why Intelligent People Fail
Why Intelligent People Fail Content from Sternberg, R. (1994). In search of the human mind. New York: Harcourt Brace. 1. Lack of motivation. A talent is irrelevant if a person is not motivated to use it. Motivation may be external (for example, social approval) or internal (satisfaction from a job well-done, for instance). External sources tend to be transient, while internal sources tend to produce more consistent performance. 2. Lack of impulse control. Habitual impulsiveness gets in the way of optimal performance. Some people do not bring their full intellectual resources to bear on a problem but go with the first solution that pops into their heads. 3. Lack of perserverance and perseveration. Some people give up too easily, while others are unable to stop even when the quest will clearly be fruitless. 4. Using the wrong abilities. People may not be using the right abilities for the tasks in which they are engaged. 5. Inability to translate thought into action. Some people seem buried in thought. They have good ideas but rarely seem able to do anything about them. 6. Lack of product orientation. Some people seem more concerned about the process than the result of activity. 7. Inability to complete tasks. For some people nothing ever draws to a close. Perhaps it’s fear of what they would do next or fear of becoming hopelessly enmeshed in detail. 8. Failure to initiate. Still others are unwilling or unable to initiate a project. It may be indecision or fear of commitment. 9. Fear of failure. People may not reach peak performance because they avoid the really important challenges in life. 10. Procrastination. Some people are unable to act without pressure. They may also look for little things to do in order to put off the big ones. 11. Misattribution of blame. Some people always blame themselves for even the slightest mishap. Some always blame others. 12. Excessive self-pity. Some people spend more time feeling sorry for themselves than expending the effort necessary to overcome the problem. 13. Excessive dependency. Some people expect others to do for them what they ought to be doing themselves. 14. Wallowing in personal difficulties. Some people let their personal difficulties interfere grossly with their work. During the course of life, one can expect some real joys and some real sorrows. Maintaining a proper perspective is often difficult. 15. Distractibility and lack of concentration. Even some very intelligent people have very short attention spans. 16. Spreading oneself too think or too thick. Undertaking too many activities may result in none being completed on time. Undertaking too few can also result in missed opportunities and reduced levels of accomplishment. 17. Inability to delay gratification. Some people reward themselves and are rewarded by others for finishing small tasks, while avoiding bigger tasks that would earn them larger rewards. 18. Inability to see the forest for the trees. Some people become obsessed with details and are either unwilling or unable to see or deal with the larger picture in the projects they undertake. 19. Lack of balance between critical, analytical thinking and creative, synthetic thinking. It is important for people to learn what kind of thinking is expected of them in each situation. 20. Too little or too much self-confidence. Lack of self-confidence can gnaw away at a person’s ability to get things done and become a self-fulfilling prophecy. Conversely, individuals with too much self-confidence may not know when to admit they are wrong or in need of self-improvement.
http://www.acceleratingfuture.com/michael/works/intelligentfailure.htm

469 10 Fun Facts You Didn't Know About Google
Google is not your average company and it's fitting that they have a history chock full of quirk. Here are 10 facts you may not have known about Google. google,Channels,Google,Google Lists,Lists,Top Stories,Web Apps,features,pop culture
http://mashable.com/2010/06/19/10-google-facts/

467 35 Essential Social Media Resources You May Have Missed
Looking for something you missed during the busy week? Check in here to catch up. Business Lists,Lists,Mobile Lists,Social Media Lists
http://mashable.com/2010/06/27/essential-social-media-resources-10/

448 HTML Ampersand Character Codes
These are character sequences that may appear in HTML documents; they represent sometimes useful symbols that are not part of the standard ASCII set or that would be difficult or impossible to type otherwise (e.g. the less-than sign, which would always be mistaken for the beginning of an HTML tag). Case is signinficant. The content of this table has been throughly tested. If the character that appears in the first column does not fit the description in the third column, your browser has a screw loose.
http://rabbit.eng.miami.edu/info/htmlchars.html

445 Doug Kaufman's Web Site - DOS ports LYNX
This site exists primarily to distribute DOS ports of programs in which I have taken an interest. This consists primarily of the text-mode web browser "lynx", the network file retrievers "wget" and "curl", the file compressor "bzip2" and the URL extractor "urlview". Running programs originally designed for unix in DOS is not necessarily easy. If you download these programs, please read the text files which explain how to set up these programs in DOS and which functional problems may be present. The latest DOS port of lynx is 2.8.5rel.1. You can download it here (2463576 bytes, 18 April 2004). This version is compiled with openssl-0.9.7d to give SSL support. This means that it can now access https:// URLs. This can now be distributed because of the easing of US export controls on encryption. Please note, however, that US regulations still prohibit export to Cuba, Iran, Iraq, Libya, North Korea, Sudan, or Syria. Do not download the file if you are from any of these countries. Please check your own country's regulations on the use of strong cryptography before using or redistributing this file.
http://www.rahul.net/dkaufman/

423 MACBETH STUDIO SYSTEMS
Welcome to MacBeth Synthesizers! LATEST NEWS: 20/07/09 please scroll down for infoOver the last year and half or so, more products have been developed. Work has gone into the design of a new modular synthesizer system shared by two formats- the 3U format and the 5U format. The designs are relatively new but still retain the inherant qualities of the M3X, M5 and M5N synthesizers. The system is called the X-Series Modular Synthesizer after the popular M3X and its protégé keyboard synthesizer the X-Factor. This fully analogue keyboard is still under serious development and there will be more information to follow on that one. As a refreshing change from making the large scale semi modular M5 and M5N, I am now delving into the production of smaller, free for all systems that will probably grow large! I'm taking into it all my experience of designing both large and small analogue synthesizers as well as a few new ideas too. Please take the time to look around this website. In each catagory there is product information, sounds, tracks and links to other related media on the internet. Currently the 3U X-Series Dual Oscillator and 'Backend' Filter Combo are in production. I expect delivery of the Dual Oscillator within the next two weeks- shortly after that the 'Backend' Filter Combo will roll out of production. Please contact any of the Distributers listed to get your modules. I intend to produce a short run of the 5U modules soon, so once again- stay tuned for that... ...anyway! I have uploaded quite a few demo sounds on here- maybe not to everyones taste- but at least they make you think of what these modules could do in the right hands, i.e. you! - after all- I'm an engineer, not a muscian as such!...Well you decide! All MacBeth Products are built to exacting standards- from materials selection to the physical build. The PCBs and Sheet Metalwork are fabricated by Zot Engineering from Musselburgh, Scotland http://www.zot.co.uk and final assembly is performed by Diatron Assembly Systems from Norwich, England http://www.diatron.co.uk Both companies also manufacture equipment for the medical, military and aerospace sectors of industrial engineering
http://www.macbethstudiosystems.com/

389 Nintendo DS News
This Nintendo DS news page is a subpage of PDRoms - a page caring and reporting about all kind of homebrew news and releases - may it be a game, technical demo or application. We update on a regular base, feel free to check back anytime! If you browse the main page carefully, you will recognize plenty of Nintendo DS ROMs (or binaries) - legal and free of charge. Enjoy! Your PDRoms-Team
http://www.pdroms.de/news/nintendods/?page=1

369 How to Install Mac OS X on a PC (Without Using a Mac)
There are many great tutorials on the web for using a Mac to install Mac OS X Snow Leopard on a PC. Unfortunately, you may be unable to follow such tutorials if you do not readily have access to a Mac to perform the preparation necessary for the installation. Great progress has been made in hacking PCs to run OS X, and it is now possible to install Mac OS X without a Mac. Thanks to some great tools put together by some brilliant hackers, it is also much easier and does not involve nearly as much time and effort as was once required.
http://www.makeuseof.com/tag/how-to-install-mac-os-x-on-a-pc-without-using-a-mac/

353 DIY music from outerspace
Welcome To MFOS, Your Synth-DIY Headquarters. What is synth-DIY? Synth-DIY is just what the name implies. Synthesizer Do It Yourself. Many people, like me, grew up in the dawn of the analog synthesizer age (Moog, ARP, Oberheim, Buchla, RCA, EMu, Fairlight, PAIA and many others) and although we may have really wanted our very own analog synthesizer with dozens of knobs and switches they were w-a-a-a-y out of our reach financially. Now many people with a modicum of electronic skills and a renewed interest in analog synthesizers are discovering that with a schematic, a PC board and some electronic components they can do it themselves!. MFOS' mission is to help people realize their synthesizer dreams. We do this by providing analog synthesizer projects with complete schematics, assembly drawings and professionally manufactured PC boards. If you already have electronic skills... welcome! If you would like to learn more about electronics or analog synthesizers then try these links: How can I start learning about electronics?, Analog Synth 101 and/or The MFOS Book Store. It's never to late to develop a new skill, reignite an old passion or exercise your creativity. Keep imagining, keep inventing, stay ingenious.
http://www.musicfromouterspace.com/analogsynth/synthdiy_links.html

297 Synth Finder v5
Find the synth that is right for you! Now you can easily find the synthesizer that you have been searching for. Simply choose the options from the menu to the left that best describe the types of synthesizers you are looking for and we'll do the rest! You may choose any options and in any combination. For example, simply choose 'Analog' for a complete list of all analog synths, or get more specific and choose additional options for a more personalized set of results. Note that we only list synths that are featured in our database here at the Vintage Synth Explorer. For more details and descriptions of what the Synth Finder options mean, click here.
http://www.vintagesynth.com/synthfinder/

285 2010 Trends article on LogoLounge.Com
logo, logos, corporate identity, branding, brand, competition, graphic, design, graphic design, drawing, sketch, rendering, sketch, search, cross referenced, trade mark, word, word mark, typographic, designer, design firm, mark, logo lounge, lounge, submit, book, margo chase, john sayles, hornall anderson, art chantry, rudiger goetz, michael vanderbyl, chermayeff & geismar inc, cronan group, liska associates, werner design, werks bird design, sandstrom design, simon & goetz, jay vigon, wink, landor and associates, mires, willoughby design group
http://www.logolounge.com/articles/default_comments.asp?ArticleID=782

214 Best User Interface Design Resources: The Round-up | Dzine Blog
If you strive to be a great designer (like most), then you’re more than likely to know that a web application or websites success many times rely solely on how well designed the User Interface may be. As you scale the web and even read books, there can be an influx of misleading information pertaining to the way you should design your UI. When in reality you should do what works best for you and your users. Below you will find a variety of excellent User Interface resources that will allow you to access, redefine, and create a well designed User Interface. You should use these resources first as inspiration, and second as somewhat of a guide as to what your users may need when they come face to face with your UI.
http://dzineblog.com/2010/03/best-user-interface-design-resources-the-round-up.html

210 What is your most productive shortcut with Vim? - Stack Overflow
I've heard a lot about Vim, both pros and cons. It really seems you should be (as a developer) faster with Vim than with any other editor. I'm using Vim to do some basic stuff and I'm at best 10 times less productive with Vim. The only two things you should care about when you talk about speed (you may not care enough about them, but you should) are: Using alternatively left and right hands is the fastest way to use the keyboard. Never touching the mouse is the second way to be as fast as possible. It takes ages for you to move your hand, grab the mouse, move it, and bring it back to the keyboard (and you often have to look at the keyboard to be sure you returned your hand properly to the right place) Here are two examples demonstrating why I'm far less productive with Vim.
http://stackoverflow.com/questions/1218390/what-is-your-most-productive-shortcut-with-vim/1220118#1220118/

101 - 201